Showing 1–160 of 174 results
-
CO2 Bottles & Accessories (38)
-
New Products (23)
-
Uncategorized (1)
-
Contender Products (17)
-
Electrical Relays & Switches (6)
-
Engine & Racing Accs (7)
-
Shifters w/Activators (4)
-
Specials (8)
-
Electric Shifter Activators (12)
-
CO2 / Air Shifter Activators (6)
-
Throttle Stops (4)
-
RPM Switches & Controllers (6)
-
Trailer Accessories (54)
-
Dial-Rite Window Markers (1)
-
Transbrake Accessories (3)
-
Master Switches (3)
-
Steering Units (8)
-
Shifter Accessories (15)
-
Repair Parts (15)
-
Shop by Brand (148)
-
PC2010 DUAL OUTPUT CO2 ADJUSTABLE REGULATOR W/ GAUGES
$199.00 Add to cart
Product DetailsPC2010 DUAL OUTPUT CO2 ADJUSTABLE REGULATOR W/ GAUGES
Dual output regulator allows you to connect to one CO2 bottle and have two different output pressures. One side is adjustable from 0-150 PSI and the other side is adjustable from 0-400 PSI.
Includes two 1/4″ hose, 90-degree swivel, Push To Connect fittings.$199.00 -
PC2042 2″ CO2 Bottle and 85 PSI Regulator
$202.99 Add to cart
Product DetailsPC2042 2″ CO2 Bottle and 85 PSI Regulator
10oz. D.O.T. certified CO2 Bottle with valve and a Single Gauge, 85-90 psi, fixed pressure, CO2 regulator. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
$202.99 -
PC2082 2″ CO2 Bottle and 150 PSI Regulator
$212.99 Add to cart
Product DetailsPC2082 2″ CO2 Bottle and 150 PSI Regulator
10oz. D.O.T. certified CO2 Bottle with valve and a Dual gauge, Adjustable 0-150 psi Regulator. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
$212.99 -
PC750 Electric CO2 Shut Off Valve
$93.99 Add to cart
Product DetailsPC750 Electric CO2 Shut Off Valve
Wires into ignition switch shutting off air supply to air components when not in use. Works with single or dual gauge regulators on low-pressure side.
$93.99 -
TC113 2.5 lb CO2 Bottle Rack
$78.99 Add to cart
Product DetailsTC113 2.5 lb CO2 Bottle Rack
Safely store 2, 2.5 lb CO2. bottles for transport. Non-marring individual bays keep bottles quiet.
$78.99 -
TC680 DRAGSTER CAGE TOOL HOLDER
$349.00 Add to cart
Product DetailsTC680 DRAGSTER CAGE TOOL HOLDER
Designed for the Sportsman size dragster cages, this tool holder sets on top the cage and has plenty of storage room and assorted holders for Spark Plugs, Allen Wrenches, Screw Drivers, Air tools, etc. Also generous trays for Oils and Aerosols. The tower has large bar magnets on both sides to allow you to place your wrenches and other metallic tools in a convenient, quick grab location. A built in safety strap is included to fasten the unit to your cage if desired.
** OUT OF STOCK – CALL FOR UPDATES **
$349.00 -
TC780 SPARK PLUG HOLDER
$34.95 Add to cart
Product DetailsTC780 SPARK PLUG HOLDER
16 Plug Spark Plug Holder. Designed to hold the most common plugs used in motorsport racing. Labeled for easy reference.
$34.95 -
SN5072WS ALL ELECTRIC HEAVY DUTY 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
$719.99 Add to cart
Product DetailsSN5072WS ALL ELECTRIC HEAVY DUTY 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
B&M Pro Ratchet (part number 80842) with a Shifnoid SN5072 Heavy Duty electric shift kit, makes a hands-free automated shifter for accurate and consistent shift points. Extra strength for hard to pull shifters sometimes caused by long shifter cables. New and improved for 2020, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. 12 and 16 volts compatible. A simple circuit prevents accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets.
$719.99 -
NC6200 Bump Box
$199.99 Add to cart
Product DetailsNC6200 Bump Box
The addition of an Outlaw Bump Box allows for a smooth transition during the drag-strip staging process. Critical to cars that need to rev up before final staging such as turbo cars but also used by many non-turbo bracket racers. Being able to slide through the pre-stage beams and into the staged beams with precise tuning, cuts down on rocking, bumping and red-light starts. This box is easy to use. Simple adjustments can be made to accommodate different tracks, power levels, and rpms. This one-touch operation results in better focus, consistent launching, and better reaction times.
With the included relay the box will interrupt either the positive or negative wire on the Trans-Brake solenoid. When the Bump button is released ( not included ), it starts the timer, opens the relay, then closes the relay when the timer times out. The amount of time determines the “bump” distance.
$199.99 -
1BCL WINDOW CLEANER
$11.99 Add to cart
Product Details1BCL WINDOW CLEANER
Clear One Window Cleaner is a non-abrasive cleaner made specifically for plastic materials. It works by sealing pores in plastic surfaces with a micro-thin layer of glossy, protective wax that allows the plastic to become resistant to debris, oil, scratches, and yellowing. Clear One cleaner also has anti-static properties to help repel dust and lint. This cleaner is easy to use — just spray on and wipe off. No buffing, rubbing, or multi-step applications are required to apply. This is the perfect cleaner for Clear One polycarbonate windows.
$11.99 -
TC585 TOOL TRAY w/ DOMINATOR CARB RING
$120.99 Add to cart
Product DetailsTC585 TOOL TRAY w/ DOMINATOR CARB RING
Engine top tool tray with carburetor ring for Dominator ( 4500 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc. Carb ring comes separate and can be left off for shop use or non carburetor engines.
$120.99 -
TC580 TOOL TRAY w/ STANDARD CARB RING
$120.99 Add to cart
Product DetailsTC580 TOOL TRAY w/ STANDARD CARB RING
Engine top tool tray with carburetor ring for standard ( 4150 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc.. Carb ring comes separate and can be left off for shop use or non carburetor engines.
$120.99 -
PC3000 ENGINE LEAN OUT KIT
$79.99 Add to cart
Product DetailsPC3000 ENGINE LEAN OUT KIT
Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10' X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.
$79.99 -
PC3100 ENGINE LEAN OUT KIT w / BRACKET
$94.99 Add to cart
Product DetailsPC3100 ENGINE LEAN OUT KIT w / BRACKET
This model includes a heavy duty aluminum bracket.
Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10′ X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.$94.99 -
PC4000 – AIR COMPRESSOR , 12 Volt
$449.99 Add to cart
Product DetailsPC4000 – AIR COMPRESSOR , 12 Volt
ELIMINATE YOUR CO2 BOTTLE AND REGULATOR
Mounted in your vehicle, it replaces your CO2 Bottle and regulator. No more filling and maintaining your bottle. Run your Air shifter, Starting Line Controller, Throttle stop and other CO2 / Air devices that operate in the range of 90-120 PSI. This includes most all devices currently used in racing and off road applications.
Includes a “No Kink” Polyurethane coiled hose and tire chuck to maintain your tire pressure, eliminating the need to haul your portable air tank.
Unlike many 12 volt compressors on the market, our customized unit has a 1/4 gallon recovery tank to supply that volume needed to activate many Air devices used in racing.
Compact size, approximately 10″ x 7″ x 4″ and net weight of only 10 lbs.
** OUT OF STOCK **
$449.99 -
TC272 GLOVE DISPENSER
$27.49 Add to cart
Product DetailsTC272 GLOVE DISPENSER
A great way to hold and dispense your latex disposable gloves. Holds most boxed disposable gloves. Mounting hardware included. (Wall mount)
$27.49 -
SN5070WS All ELECTRIC 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
$669.99 Add to cart
Product DetailsSN5070WS All ELECTRIC 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
B&M Pro Ratchet (part number 80842) with a Shifnoid SN5070 electric shift kit, makes a hands-free automated shifter for accurate and consistent shift points. New and improved for 2018, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevent accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets.
(CO2 version available – call 1-800-279-3724)ATTENTION: Not recommended for Ford C4 and C6 transmissions with full manual valve body with the line pressure set above 200 P.S.I.. These transmissions at high pressure create a load greater than these electric solenoids can handle. The best choice for these heavy-duty loads is the SN5072 Heavy-Duty electric kit or the SA4070 CO2/Air Kit.
$669.99 -
SN5200WSMB 2-SPEED ELECTRIC SHIFTER WITH SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
$749.99 Add to cart
Product DetailsSN5200WSMB 2-SPEED ELECTRIC SHIFTER WITH SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
Side or Floor Mounting, ideal for dragsters and roadsters.
Hands-free automated shifting for accurate and consistent shift points. Solenoid mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes complete shifter package, solenoid, solenoid mount, and relay.
– Rear Cable Exit for P/G Transmissions
– Neutral Safety Switch
– Reverse Lock Out
– Includes B&M Magnum Grip Shifter & SHIFNOID Solenoid
– Includes P/G Shift Arm
– Includes 8′ Severe Duty Cable
– Optional 70469 Cable Bracket Needed for “Door Cars”
– Optional 80884 Mounting Bracket for Floor Mounting Shifter$749.99 -
SN5250WSMB 2-SPEED ELECTRIC SHIFTER W/HEAVY DUTY SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
$774.99 Add to cart
Product DetailsSN5250WSMB 2-SPEED ELECTRIC SHIFTER W/HEAVY DUTY SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
Side or Floor Mounting, ideal for dragsters and roadsters.
Hands-free automated shifting for accurate and consistent shift points. Solenoid mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button, and the solenoid-operated shifter makes your 1-2 shift. Includes complete shifter package, heavy-duty solenoid, ideal for long cables and hard-to-shift transmissions, solenoid mount, and relay.
– Rear Cable Exit for P/G Transmissions
– Neutral Safety Switch
– Reverse Lock Out
– Includes B&M Magnum Grip Shifter & SHIFNOID Solenoid
– Includes P/G Shift Arm
– Includes 8′ Severe Duty Cable
– Optional 70469 Cable Bracket Needed for “Door Cars”
– Optional 80884 Mounting Bracket for Floor Mounting Shifter$774.99 -
81060 MAGNUM GRIP W/ BUTTON ACTUATOR
$129.99 Add to cart
Product Details81060 MAGNUM GRIP W/ BUTTON ACTUATOR
CNC machined billet aluminum side plate with integral 12-volt button.
$129.99 -
Strange Engineering
Read more
Product DetailsStrange Engineering
Contact Contender Performance Products, Inc. for all of your Strange Engineering needs! Call 740-927-0060 or 800-279-3724.
-
SW7010 TRANSBRAKE OR LINE LOCK SWITCH w/COIL CORD
$59.99 Add to cart
Product DetailsSW7010 TRANSBRAKE OR LINE LOCK SWITCH w/COIL CORD
Ideal for steering wheel mounting. Heavy duty, 18 AWG coil cord. Extends to 6 Foot. 15 AMP rating.
$59.99 -
PC2004 CO2 REGULATOR, 85 lb. FIXED PRESSURE w/GAUGE
$84.99 Add to cart
Product DetailsPC2004 CO2 REGULATOR, 85 lb. FIXED PRESSURE w/GAUGE
Single gauge shows bottle pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
$84.99 -
PC2008 CO2 REGULATOR, ADJUSTABLE PRESSURE w/DUAL GAUGES
$89.99 Add to cart
Product DetailsPC2008 CO2 REGULATOR, ADJUSTABLE PRESSURE w/DUAL GAUGES
Dual gauge adjustable 0-150 lb, shows bottle and line pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
$89.99 -
PC2020 CO2 Bottle, 10 OZ. WITH STANDARD VALVE
$129.99 Add to cart
Product DetailsPC2020 CO2 Bottle, 10 OZ. WITH STANDARD VALVE
D.O.T. certified lightweight bottle with standard valve. 2″ diameter. “This bottle does NOT need re-certified every 1 or 5 years. The PC2020, 10 oz. CO2 bottle is D.O.T. exempt from periodic retesting.
$129.99 -
PC2030 CO2 BOTTLE, 2.5 LB. WITH STANDARD VALVE
$129.99 Add to cart
Product DetailsPC2030 CO2 BOTTLE, 2.5 LB. WITH STANDARD VALVE
DOT certified bottle with standard valve. 4 3/8″ diameter.
$129.99 -
PC2022 CO2 BOTTLE, 10 OZ. WITH STRAIGHT VALVE
$139.99 Add to cart
Product DetailsPC2022 CO2 BOTTLE, 10 OZ. WITH STRAIGHT VALVE
DOT certified lightweight bottle with lightweight straight through valve. 2″ diameter.
$139.99 -
PC2032 CO2 BOTTLE, 2.5 LB. WITH STRAIGHT VALVE
$139.99 Add to cart
Product DetailsPC2032 CO2 BOTTLE, 2.5 LB. WITH STRAIGHT VALVE
DOT certified bottle with straight through valve. 4 3/8″ diameter.
$139.99 -
PC112 C02 BOTTLE RACKS
$46.49 Add to cart
Product DetailsPC112 C02 BOTTLE RACKS
Safely store 2 standard 10 oz. bottles for transport. Non-marring individual bays keep bottles quiet. Measurements: 9″W x 9.5″H x 3.5″D. Weight: 1.2 lbs.(Wall Mount)
$46.49 -
PC650 10oz CO2 Bottle Replacement Knob
$8.99 Add to cart
Product DetailsPC650 10oz CO2 Bottle Replacement Knob
Replacement knob for new style Sherwood Valve with male rupture disc. Mounting Hole dimensioned for 5/16″ valve stem.
$8.99 -
CMW8900 THROTTLE STOP / STARTING LINE CONTROLLER
$329.99 Add to cart
Product DetailsCMW8900 THROTTLE STOP / STARTING LINE CONTROLLER
A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
$329.99 -
CMW8900 THROTTLE STOP / STARTING LINE CONTROLLER
$329.99 Add to cart
Product DetailsCMW8900 THROTTLE STOP / STARTING LINE CONTROLLER
A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
$329.99 -
CMW8925 THROTTLE STOP / STARTING LINE CONTROLLER
$349.99 Add to cart
Product DetailsCMW8925 THROTTLE STOP / STARTING LINE CONTROLLER
A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
$349.99 -
CMW8925 THROTTLE STOP / STARTING LINE CONTROLLER
$349.99 Add to cart
Product DetailsCMW8925 THROTTLE STOP / STARTING LINE CONTROLLER
A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
$349.99 -
CMW9000 THROTTLE STOP / STARTING LINE CONTROLLER
$279.99 Add to cart
Product DetailsCMW9000 THROTTLE STOP / STARTING LINE CONTROLLER
A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
$279.99 -
CMW9000 THROTTLE STOP / STARTING LINE CONTROLLER
$279.99 Add to cart
Product DetailsCMW9000 THROTTLE STOP / STARTING LINE CONTROLLER
A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
$279.99 -
CMW9025 THROTTLE STOP / STARTING LINE CONTROLLER
$299.99 Add to cart
Product DetailsCMW9025 THROTTLE STOP / STARTING LINE CONTROLLER
A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
$299.99 -
CMW9025 THROTTLE STOP / STARTING LINE CONTROLLER
$299.99 Add to cart
Product DetailsCMW9025 THROTTLE STOP / STARTING LINE CONTROLLER
A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
$299.99 -
SN5000 ALL ELECTRIC 2 SPEED SHIFT KIT FOR MOST 2 SPEED SHIFTERS
$144.99 Select options This product has multiple variants. The options may be chosen on the product page
Product DetailsSN5000 ALL ELECTRIC 2 SPEED SHIFT KIT FOR MOST 2 SPEED SHIFTERS
Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, bracket, and relay.
SN5000FC Shift Kit – fits B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, and TCI Thunderstick with Front Exit Cable Shifter. Forward Pattern 2 speed only. Replacement solenoid for FC kit (SN3400).
SN5000RC Shift Kit – Fits Hurst Quarter Stick II with Rear Exit Cable
Replacement solenoid for RC kit (SN3410)$144.99 -
80884 MOUNTING BRACKET FOR B&M PRO BANDIT
$38.99 Add to cart
Product Details80884 MOUNTING BRACKET FOR B&M PRO BANDIT
Optional bracket used for floor mounting B&M Pro-Bandit Shifter.
Works in conjunction with the SA5400WSM and SA5400WS, SN5200WS and SN5200WSM.
$38.99 -
SUPER DUTY RACE SHIFTER CABLES
Price range: $84.99 through $119.99 Select options This product has multiple variants. The options may be chosen on the product page
Product DetailsSUPER DUTY RACE SHIFTER CABLES
B&M’s superior grade of hard core super duty race cables have up to 50% less backlash than competitive cables.
- These cables are supplied with Pro Ratchet & Pro Stick shifters
- Works with all B&M Pro Bandit Shifters
- Rotary swaged ends (eyelet/thread ends)
- Less than .015″ per foot backlash
- .375″ O.D. Red ‘long lay’ outer jacket
- Prelubed for smooth operation
Price range: $84.99 through $119.99 -
70469 POWERGLIDE BRACKET FOR B&M PRO BANDIT USED ON A DOOR CAR
$42.99 Add to cart
Product Details70469 POWERGLIDE BRACKET FOR B&M PRO BANDIT USED ON A DOOR CAR
Needed when using any B&M Pro-Bandit Shifter when installed with the cable coming in from the rear of the transmission (typically for door cars).
Works in conjunction with the SA5400WSM and SA5400WS, SN5200WS and SN5200WSM.
$42.99 -
46112 UNIVERSAL SHIFT KNOB WITH BUTTON
$94.99 Add to cart
Product Details46112 UNIVERSAL SHIFT KNOB WITH BUTTON
Knob activates any line lock, roll control or nitrous system -Works with 12 or 16 volt systems -Fits B&M Pro Stick and Pro Ratchet Shifters.
$94.99 -
FR1501 71-72 PINTO MANUAL RACK & PINION
$299.99 Add to cart
Product DetailsFR1501 71-72 PINTO MANUAL RACK & PINION
This manual rack & pinion is designed to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality, aluminum castings and chromed plated steel center tube. This unit weighs only 12lbs with steering specifications of 3.75 turns lock-to-lock; rack travel 5.25″; overall length 45 1/2 inches.
$299.99 -
FR1503 5.0L MUSTANG MANUAL RACK & PINION STD. RATIO (1979-1993)
$299.99 Add to cart
Product DetailsFR1503 5.0L MUSTANG MANUAL RACK & PINION STD. RATIO (1979-1993)
These kits are designed for the 5.0L (79-93) Mustang. These racks are ideal for road racing and other applications where a very responsive steering system is required.
Steering Specifications: STANDARD — 20:1 ratio, 4 turns lock to lock. Rack travel — 5.25″. Mounting position: 15-1/2″ center-to-center$299.99 -
FR1520 5.0L MUSTANG MANUAL RACK & PINION QUICK RATIO (1979-1993)
$419.99 Add to cart
Product DetailsFR1520 5.0L MUSTANG MANUAL RACK & PINION QUICK RATIO (1979-1993)
This kit is designed for the 5.0L (79-93) Mustang. These racks are ideal for road racing and other applications where a very responsive steering system is required.
Steering Specifications: QUICK RATIO — 15;1 ratio, 3.3 turns lock-to-lock (25% faster than a standard unit). Rack travel — 5.25″. Mounting position: 15-1/2″ center-to-center$419.99 -
FR1508 5.0L MUSTANG MANUAL RACK & PINION STD. RATIO (1994-2004)
$489.99 Add to cart
Product DetailsFR1508 5.0L MUSTANG MANUAL RACK & PINION STD. RATIO (1994-2004)
These kits are designed for the 5.0L (94-04) Mustang (non-Modular engines). These racks are ideal for road racing and other applications where a very responsive steering system is required.
Steering Specifications: STANDARD — 20:1 ratio, 4 turns lock to lock). Rack travel — 5.25″. Mounting position: 15-1/2″ center-to-center$489.99 -
FR1500 PERFORMANCE VEGA STYLE STEERING BOX
$569.99 Add to cart
Product DetailsFR1500 PERFORMANCE VEGA STYLE STEERING BOX
The Flaming River Performance Vega style steering box is an all NEW unit designed specifically for street rods. This box is 30% stronger than the OEM box and utilizes the latest technology with a smooth needle bearing design. This new design far outlasts the original bushing design of the 70's.
$569.99 -
DD1067 DIGITAL DELAY – ELITE RPM SWITCH
$239.99 Add to cart
Product DetailsDD1067 DIGITAL DELAY – ELITE RPM SWITCH
The Digital Delay Elite RPM Switch can handle up to four adjustable digital shift points (no chips to change or buy). The RPM can be adjusted in 100 RPM increments and is retained in memory even when power is removed. A selectable Shift Mode feature allows the shift output to be set for Normally Closed or Normally Open. The 40 Amp capacity shift output can handle most shifters without the need for an additional relay or wiring. Also, a handy shift test feature allows the testing of the wiring, shift solenoid, and shift cable without the motor running. This unit solves the problem of low or insufficient RPM drop between shifts, a common problem to our mud-racing customers.
$239.99 -
NCRPM3000 RPM SWITCH W/DELAY
$174.99 Add to cart
Product DetailsNCRPM3000 RPM SWITCH W/DELAY
Prevent premature RPM Switch activation due to tire spin or converter flash off the starting line. An additional circuit in the RPM switch provides a 1 second delay in the activation of the RPM Switch. This delay feature only prevents the RPM Switch from activating in the first second. It cannot be used as a delay box. Use for a variety of functions such as activating CO2 or electric shifters, Nitrous solenoids, shift lights, timing computers or anything that needs to be activated at a preset RPM. Switch is easily adjusted using optional plug in modules. 12 and 16 volt compatible, and will work with all ignition systems, except Magnetos. 8 cylinder only. Single coil only.
** OUT OF STOCK **
$174.99 -
NCRPM1000 RPM SWITCH
$149.99 Add to cart
Product DetailsNCRPM1000 RPM SWITCH
Use for a variety of functions such as activating CO2 or electric shifters, Nitrous solenoids, shift lights, timing computers or anything that needs to be activated at a preset RPM. Switch is easily adjusted using optional plug in modules. 12 and 16 volt compatible, and will work with all ignition systems, except Magnetos. 8 cylinder only. Single coil only.
$149.99 -
MSD8950 MSD RPM ACTIVATED SWITCH
$179.99 Add to cart
Product DetailsMSD8950 MSD RPM ACTIVATED SWITCH
This RPM-Activated Switch, has two activation wires; one to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the Switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount. This Switch can be used with stock inductive ignitions or an MSD Ignition and can handle up to 1.5 amps. Ideal for use with Air or Electric shifters. For use on 4, 6, or 8-cylinder engines.
$179.99 -
FR1010 MAGNETO & BATTERY KILL SWITCH (COMBO)
$199.99 Add to cart
Product DetailsFR1010 MAGNETO & BATTERY KILL SWITCH (COMBO)
Dual circuit switch simultaneously shuts down both the battery and magneto. Waterproof spring-loaded design with silver plated brass contacts. Rated at 250 amps continuous service, 2,500 amps for 5 second surges. Accepted for NHRA/IHRA competition use. Furnished with an easy-grip T-handle, and anodized aluminum mounting bracket.
$199.99 -
FR1003-2 THE BIG SWITCH WITH LEVER KIT
$149.99 Add to cart
Product DetailsFR1003-2 THE BIG SWITCH WITH LEVER KIT
The lever kit allows for remote actuation of the Big Switch. The kit includes an 18″ long, diameter aluminum threaded rod, T-handle, mounting bracket and necessary hardware. A “push off” decal is included. Accepted for IHRA/NHRA competition use. Design Details
$149.99 -
FR1003 THE BIG SWITCH
$139.99 Add to cart
Product DetailsFR1003 THE BIG SWITCH
Top racers realize that using a low amp switch creates resistance and actually reduces power. Flaming River’s heavy duty battery disconnect switch is top of the line designed for complex electrical systems and 16 Volt batteries. Rated at 250 amps continuous service (12/16/24V) and 2500 amps for 5 second surges. The Big Switch is a spring-loaded, vibration resistant waterproof design. Accepted by most sanctioning bodies including IHRA/NHRA. Furnished with an easy-grip T-handle, anodized aluminum bracket and zinc plated mounting hardware.
Design Details (PDF)$139.99 -
FR1800B MIL-SPEC UNIVERSAL JOINTS
$189.99 Select options This product has multiple variants. The options may be chosen on the product page
Product DetailsFR1800B MIL-SPEC UNIVERSAL JOINTS
These universal joints are manufactured to military specifications for aircraft and have become the select choice of drag racers due to the lightweight design. Lubricant-filled silicone boot provides maintenance-free operation for extended universal joint life. This boot is designed for high temperature environments with a continuous rating of 650° Fahrenheit. Please note nominal size is outside diameter. Not for street use. Specification & Performance Charts (PDF)
$189.99 -
FR1820 STEEL PIN AND BLOCK U-JOINT (3/4″ x 3/4″ SMOOTH)
$149.99 Add to cart
Product DetailsFR1820 STEEL PIN AND BLOCK U-JOINT (3/4″ x 3/4″ SMOOTH)
The preferred choice of drag racers for the sleek and lightweight designed steering systems.This block & pin universal joint is 3/4″ smooth X 3/4″ smooth – 1.000″ O.D.
NOTE: Racing design only, NOT recommended for street use.
(photo is for example only – sold individually)$149.99 -
FR1821 STEEL PIN AND BLOCK U-JOINT (3/4″ SMOOTH x 9/16″ – 26)
$149.99 Add to cart
Product DetailsFR1821 STEEL PIN AND BLOCK U-JOINT (3/4″ SMOOTH x 9/16″ – 26)
The preferred choice of drag racers for the sleek and lightweight designed steering systems.This block & pin universal joint is 3/4″ smooth X 9/16″-26 – 1.000″ O.D.
NOTE: Racing design only, NOT recommended for street use.
(photo is for example only – sold individually)$149.99 -
DRP1 DIAL-RITE “POCKET SIZE” WINDOW MARKER (White)
$7.49 Add to cart
Product DetailsDRP1 DIAL-RITE “POCKET SIZE” WINDOW MARKER (White)
The DIAL-RITE POCKET SIZE markers add convenience for carrying to write your “dial in” on your race car windows. Designed for Hi Visibility and easy, wipe-off removal with a dry rag, these products are designed for today’s polycarbonate, Lexan Marguard, and assorted plastic windows as well as glass. Also commonly used for advertising and celebration, these multi-colored products will grab your attention. 1 oz.
Available in: White and Yellow$7.49 -
TC540 JR. DRAGSTER WORK STAND HOLDER
$93.49 Add to cart
Product DetailsTC540 JR. DRAGSTER WORK STAND HOLDER
Holds the most popular brands of “Jr. Dragster Work Stands” securely to your wall or floor. High Strength ABS material, light weight, scratch resistant. Also works well for lawn chairs and small folding tables. Approx. Dimensions: 32″ x 7″ x 18″.
$93.49 -
TC510 DRUM PUMP HOLDER
$31.34 Add to cart
Product DetailsTC510 DRUM PUMP HOLDER
Store your siphon drum pump with out having to lift the pump clear up and out of the holder. Can mount close to the ceiling. ABS storage bracket keeps your pump in place for safe storage. PUMP NOT INCLUDED. (Wall Mount)
$31.34 -
TC359 CLEAR VINYL DOOR STRIPS FOR 8’x7′ OPENING
$299.99 Add to cart
Product DetailsTC359 CLEAR VINYL DOOR STRIPS FOR 8’x7′ OPENING
Clear vinyl strip doors are designed to keep dirt and dust from entering the door openings of your trailer as well as keeping air-conditioned trailers cool without closing up the doors. Can easily be trimmed for custom fit. Unique universal mount for installation to ceiling or wall. Industrial quality 8″ x .08″ verilon strips with a full 50% overlap.
For 8'x7' opening.$299.99 -
TC159 CLEAR VINYL DOOR STRIPS FOR 4’x7′ OPENING
$189.99 Add to cart
Product DetailsTC159 CLEAR VINYL DOOR STRIPS FOR 4’x7′ OPENING
Clear vinyl strip doors are designed to keep dirt and dust from entering the door openings of your trailer as well as keeping air-conditioned trailers cool without closing up the doors. Can easily be trimmed for custom fit. Unique universal mount for installation to ceiling or wall. Industrial quality 8″ x .08″ verilon strips with a full 50% overlap.
For 4'x7' opening.$189.99 -
TC158 CLEAR VINYL DOOR STRIPS FOR 4’x6′ OPENING
$179.99 Add to cart
Product DetailsTC158 CLEAR VINYL DOOR STRIPS FOR 4’x6′ OPENING
Clear vinyl strip doors are designed to keep dirt and dust from entering the door openings of your trailer as well as keeping air conditioned trailers cool without closing up the doors. Can easily be trimmed for custom fit. Unique universal mount for installation to ceiling or wall. Industrial quality 8″ x .08″ verilon strips with a full 50% overlap.
For 4'x6' opening.$179.99 -
TC252 HANS® DEVICE HOLDER
$54.99 Add to cart
Product DetailsTC252 HANS® DEVICE HOLDER
Safely store your Hans “Sport Model” Head & Neck Restraint.( Not compatible with “Hybrid Pro” devices ) Measurements – 16″H x 14″W x 6″D (Wall Mount) DISCONTINUED, LIMITED SUPPLY AVAILABLE.
$54.99 -
TC208 TORSION BAR RACK
$107.24 Add to cart
Product DetailsTC208 TORSION BAR RACK
The ideal way to store up to 12 torsion bars while in transit. 2″ diameter, scratch resistant holes protect against damage. Predrill to match your trailer wall studs. Measurements: Each piece: Approx. 34″W x 5.75″H x 4.25″D (Wall / Floor Mount)
$107.24 -
TC206 CHASSIS STABILIZER BLADDER RACK
$27.49 Add to cart
Product DetailsTC206 CHASSIS STABILIZER BLADDER RACK
Clutter in the race trailer? Grab one of our Chassis Stabilizer Racks and safely store your stabilizer! Measurements – 2.25″D x 6.25″H x 23.5″W (Wall Mount)
$27.49 -
TC182 PUSH BROOM HOLDER
$28.59 Add to cart
Product DetailsTC182 PUSH BROOM HOLDER
One piece construction holds one push broom secure for travel. Measurements – 24″W x 10″H x 8″D (Wall Mount)
$28.59 -
TC180 BROOM HOLDER
$24.19 Add to cart
Product DetailsTC180 BROOM HOLDER
Keep your broom secure during travel, yet handy for easy clean ups. One piece construction holds a straight broom. Measurements – 13″W x 11″H x 5″D (Wall Mount)
$24.19 -
TC152 CUP HOLDER
$21.99 Add to cart
Product DetailsTC152 CUP HOLDER
Great for RV’s, trucks, or trailers. Holds 2 cups. Measurements: 8″W x 3.5″H x 4″D Weight: 0.5 lbs.(Multiple Mounting Options
$21.99 -
TC151 DELUXE HELMET BAY
$120.44 Add to cart
Product DetailsTC151 DELUXE HELMET BAY
Deluxe helmet bay with foam lining, apparel hook and storage shelf for neck collar, gloves, etc. Measurements: 15.5″W x 14″H x 13″D Weight: 7 lbs. (Wall Mount)
Also, see TC116 STANDARD HELMET BAY.$120.44 -
TC116 STANDARD HELMET BAY
$87.99 Add to cart
Product DetailsTC116 STANDARD HELMET BAY
Single bay helmet storage with foam lining and apparel hook. Measurements: 15.5″W x 13″H x 13″D Weight: 5 lbs. (Wall Mount)
Also, see TC151 DELUXE HELMET BAY.$87.99 -
TC148 JACK PAD POUCH
$31.34 Add to cart
Product DetailsTC148 JACK PAD POUCH
The jack pad pouch stores up to 2 pads and is designed for wall mounting for easy access and out of the way storage. Measurements: 15″W x 8.5″H x 2″D. Weight: 1.2 lbs.(Wall Mount)
$31.34 -
TC249 NITROUS 10 LB FLOOR MOUNT BOTTLE RACKS (4 BAYS)
$108.34 Add to cart
Product DetailsTC249 NITROUS 10 LB FLOOR MOUNT BOTTLE RACKS (4 BAYS)
Safely stores 2 to 4, ten pound nitrous bottles safely for transport. Non-marring individual bays keep bottles quiet
$108.34 -
TC149 NITROUS 10 LB FLOOR MOUNT BOTTLE RACKS (2 BAYS)
$65.99 Add to cart
Product DetailsTC149 NITROUS 10 LB FLOOR MOUNT BOTTLE RACKS (2 BAYS)
Safely stores 2 to 4, ten pound nitrous bottles safely for transport. Non-marring individual bays keep bottles quiet
$65.99 -
TC147 JACK PADS (PAIR)
$59.94 Add to cart
Product DetailsTC147 JACK PADS (PAIR)
These 12″ x 12″ jack pads can be used for trailer tongue jacks, RV leveling jacks and much more, each pad has a 20,000 lb rating capacity and includes a non-skid surface and nylon rope handle. Measurements: 12″W x 12″H x .75″D. Nominal. Weight: 3.7 lbs. (each). 7.75 lbs. (pair).
$59.94 -
TC146 JACK PAD
$32.44 Add to cart
Product DetailsTC146 JACK PAD
These 12″ x 12″ jack pads can be used for trailer tongue jacks, RV leveling jacks and much more, each pad has a 20,000 lb rating capacity and includes a non-skid surface and nylon rope handle. Measurements: 12″W x 12″H x .75″D. Nominal. Weight: 3.7 lbs. (each). 7.4 lbs. (pair).
$32.44 -
TC145 SHATTERPROOF MIRROR
$21.99 Add to cart
Product DetailsTC145 SHATTERPROOF MIRROR
Made from 1/8″ High Impact mirror grade plastic material. Measurements: 9″W x 12″H x 0.125″D. Weight: 0.3 lbs. (Wall Mount)
$21.99 -
TC144 STANDARD TIRE GAUGE POUCH
$20.89 Add to cart
Product DetailsTC144 STANDARD TIRE GAUGE POUCH
The tire gauge pouch stores your tire gauge when not in use. Great for mounting on the door cabinet for easy access. Fits standard tire gauges up to 3.25″ wide and 1.75″deep. Measurements: 3.3″W x 3.5″H x 2″D Weight: 0.5 lbs.(Wall/Floor Mount)
$20.89 -
TC143 MAGNUM TIRE GAUGE POUCH
$25.29 Add to cart
Product DetailsTC143 MAGNUM TIRE GAUGE POUCH
The tire gauge pouch stores your tire gauge when not in use. Great for mounting on the door cabinet for easy access. Fits large tire gauges up to 4.25″ wide and 1.75″deep. Measurements: 5.25″W x 3.5″H x 2.125″D Weight: 0.5 lbs.(Wall/Floor Mount)
$25.29 -
TC142 HELMET HOOK
$18.69 Add to cart
Product DetailsTC142 HELMET HOOK
This universal helmet hook keeps your helmet within easy reach up and out of the way. Measurements: 2.5″W x 3.5″H x 6″D. Weight: 0.2 lbs. (Wall Mount)
$18.69 -
TC141 PAPER TOWEL RACK
$21.99 Add to cart
Product DetailsTC141 PAPER TOWEL RACK
The paper towel rack is small enough to mount just about anywhere for easy access. Can be mounted vertically or horizontally. No bar to remove, simply bend sides outward and the paper towel roll will slide on. Measurements: 11.5″W x 4.5″H x 5″D. Weight: 0.5 lbs.(Wall/Door Mount)
$21.99 -
TC156 DOOR / WALL CABINET WITH 2 ROLL PAPER TOWEL HOLDER
$153.99 Add to cart
Product DetailsTC156 DOOR / WALL CABINET WITH 2 ROLL PAPER TOWEL HOLDER
The base door/wall cabinet weighs only 9.7 pounds and includes 3 shelves to accommodate aerosol cans and other items similar in size along with a double roll paper towel holder. No bar to remove simply bend the sides outward and the paper towel roll will slide on. Measurements: 23″W x 37″H x 4.5″D. Weight: 9.7 lbs.
$153.99 -
TC138 SMALL DOOR CABINET
$104.49 Add to cart
Product DetailsTC138 SMALL DOOR CABINET
The small door cabinet is ideal for limited space and is very light weight. It includes 2 shelves for aerosol cans and other items similar in size along with a single roll paper towel holder. No bar to remove, simply bend the sides outward and the paper towel roll will slide on. Measurements: 12″W x 23.3″H x 4.8″D. Weight: 4.6 lbs.
$104.49 -
TC137 BASE DOOR / WALL CABINET
$129.79 Add to cart
Product DetailsTC137 BASE DOOR / WALL CABINET
The base door/wall cabinet weighs only 9.5 pounds and includes 3 shelves to accommodate aerosol cans and other items similar in size. Measurements: 22.5″W x 32″H x 4.5″D Weight: 9.5 lbs.
$129.79 -
TC134 FUNNEL HOLDER
$38.49 Add to cart
Product DetailsTC134 FUNNEL HOLDER
Wall mounted unit stores triangular funnels up and out of the way. Measurements: 17″W x 3″H x 11″D. Weight: 0.8 lbs. (Wall Mount)
$38.49 -
TC132 JACK POUCH
$108.89 Add to cart
Product DetailsTC132 JACK POUCH
Wall-mounted unit stores race jacks up and out of the way for transport and storage. Designed for low-profile, lightweight, aluminum floor jacks. Maximum weight capacity is 68 lbs. Measurements: 18″W x 25.5″H x 5.5″D. Weight: 7.5 lbs. (Wall/Floor-mount for jacks over 42 lbs.)
$108.89 -
TC130 CANOPY STRAPS (PAIR)
$71.49 Add to cart
Product DetailsTC130 CANOPY STRAPS (PAIR)
Fully adjustable 2″ straps and wall unit keeps your 10’x10′ and 10’x20′ canopy secure during travel. Measurements: 11.5″W x 4.5″H x 1″D
Weight: 2 lbs.(Wall Mount)$71.49 -
TC128 COLLAPSIBLE CHAIR RACK
$59.94 Add to cart
Product DetailsTC128 COLLAPSIBLE CHAIR RACK
Rack holds 3 collapsible chairs. Closed bottom allows for wall storage. Measurements: Each level, 21.5″W x 4″H x 6.5″D Total Weight: 5 lbs.(Wall/Floor Mount)
$59.94 -
TC129 MAGNUM COLLAPSIBLE CHAIR RACK
$73.69 Add to cart
Product DetailsTC129 MAGNUM COLLAPSIBLE CHAIR RACK
Designed for the large, oversized collapsible chairs including those with sun shields and foot rest. Rack holds 3 chairs.
Closed bottom allows for wall storage. Measurements: Each level, 26.5″W x 4″H x 8.5″D Total Weight: 8 lbs. (Wall/Floor Mount)$73.69 -
TC120 OIL QUART RACKS (12 Quart)
$51.14 Add to cart
Product DetailsTC120 OIL QUART RACKS (12 Quart)
Floor mounted racks keep your extra supply of oil neat and out of the way.
$51.14 -
TC119 OIL QUART RACKS (6 Quart)
$39.04 Add to cart
Product DetailsTC119 OIL QUART RACKS (6 Quart)
Floor mounted racks keep your extra supply of oil neat and out of the way.
$39.04 -
TC118 AEROSOL CAN SHELVING (12 CAN)
$43.44 Add to cart
Product DetailsTC118 AEROSOL CAN SHELVING (12 CAN)
Wall mounted lightweight racks to keep your aerosol cans neat and at your fingertips.
$43.44 -
TC117 AEROSOL CAN SHELVING (8 CAN)
$37.94 Add to cart
Product DetailsTC117 AEROSOL CAN SHELVING (8 CAN)
Wall mounted lightweight racks to keep your aerosol cans neat and at your fingertips.
$37.94 -
TC115 UNIVERSAL CORD / HOSE HANGER
$18.69 Add to cart
Product DetailsTC115 UNIVERSAL CORD / HOSE HANGER
Stores electrical cords or air hoses for easy accessibility. Measurements: 4.5″W x 5″H x 4″D. Weight: 0.5 lbs.(Wall Mount)
$18.69 -
TC112 C02 BOTTLE RACKS
$51.14 Add to cart
Product DetailsTC112 C02 BOTTLE RACKS
Safely store 2 standard 10 oz. bottles for transport. Non-marring individual bays keep bottles quiet. Measurements: 9″W x 9.5″H x 3.5″D. Weight: 1.2 lbs.(Wall Mount)
$51.14 -
TC111 FUEL JUG RACK (4 BAY)
$102.29 Add to cart
Product DetailsTC111 FUEL JUG RACK (4 BAY)
Holds round or square fuel jugs securely in trailer for transport (four bay)
$102.29 -
TC110 FUEL JUG RACK (3 BAY)
$87.99 Add to cart
Product DetailsTC110 FUEL JUG RACK (3 BAY)
Holds round or square fuel jugs securely in trailer for transport (three bay)
$87.99 -
TC109 FUEL JUG RACK (2 BAY)
$71.49 Add to cart
Product DetailsTC109 FUEL JUG RACK (2 BAY)
Holds round or square fuel jugs securely in trailer for transport (single bay)
$71.49 -
TC108 FUEL JUG RACK (1 BAY)
$54.99 Add to cart
Product DetailsTC108 FUEL JUG RACK (1 BAY)
Holds round or square fuel jugs securely in trailer for transport (single bay)
$54.99 -
TC106 DRAGSTER NOSECONE RACK
$87.99 Add to cart
Product DetailsTC106 DRAGSTER NOSECONE RACK
Fully adjustable nose cone holder that secures your nose for transport. Complete with rubber edge trim to protect your paint. Measurements: 10″W x 16″H x 2″D. Weight: 2.3 lbs. (Wall Mount)
$87.99 -
TC104 CAR DUSTER POUCH
$33.54 Add to cart
Product DetailsTC104 CAR DUSTER POUCH
Store your car duster out of the way and keep it within reach. Measurements: 9’W x 12″H x 4″D. Weight: 1.5 lbs. (Wall Mount)
$33.54 -
TC102 “D” CELL FLASHLIGHT HOLDER
$20.89 Add to cart
Product DetailsTC102 “D” CELL FLASHLIGHT HOLDER
Holds multi length “D” Cell flashlights. Includes rubber grommet for secure fit. Measurements: 3.5″W x 7″H x 4″D. Weight: 0.4 lbs.
(Wall Mount)
$20.89 -
TC560 TRAILER-AID® STORAGE POUCH
$28.59 Add to cart
Product DetailsTC560 TRAILER-AID® STORAGE POUCH
Wall Mount bracket safely stores your TRAILER AID ramp device.
$28.59 -
TC100 TIE DOWN HANGER
$19.79 Add to cart
Product DetailsTC100 TIE DOWN HANGER
Stores up to 6 ratchet straps or tie-downs securely out of the way. Measurements: 12″W x 3″H x 3″D. Weight: 0.5 lbs. (Wall Mount)
$19.79 -
PC2015 SHIFNOID STRAIGHT THROUGH VALVE FOR 10 OZ. CO2 BOTTLES
$45.99 Add to cart
Product DetailsPC2015 SHIFNOID STRAIGHT THROUGH VALVE FOR 10 OZ. CO2 BOTTLES
Replace your heavy V1 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
$45.99 -
PC2017 SHIFNOID STRAIGHT THROUGH VALVE FOR 2.5 LB. CO2 BOTTLES
$45.99 Add to cart
Product DetailsPC2017 SHIFNOID STRAIGHT THROUGH VALVE FOR 2.5 LB. CO2 BOTTLES
Replace your heavy V4 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
$45.99 -
PC2000 PERMA-SEAL CO2 OUTLET SEAL
$4.99 Add to cart
Product DetailsPC2000 PERMA-SEAL CO2 OUTLET SEAL
Perma-Seal provides a permanent seal for the connection between your CO2 regulator and bottle valve . No more leaks. No more plastic washers. Works with CO2 bottle valves that are internally threaded.
(photo is for example only – sold individually)$4.99 -
PC2001 CO2 REGULATOR SEALS (pack of 5)
$6.99 Add to cart
Product DetailsPC2001 CO2 REGULATOR SEALS (pack of 5)
Replace the worn or missing seal between your CO2 bottle and Regulator (pack of 5).
$6.99 -
PC1800 CO2 BOTTLE BACKUP AIR FILLER
$24.99 Add to cart
Product DetailsPC1800 CO2 BOTTLE BACKUP AIR FILLER
Empty CO2 bottle? Ever run out of CO2? Fill your CO2 bottle with compressed air directly from your air tank or air compressor. Designed for the high pressures associated with CO2, this part stays permanently on your regulator, ready for immediate use. This unit eliminates the problems of home built units and the dangers of high pressure. Because your regulator prevents free back flow, trying to fill your bottle from the regulated side will not allow your bottle to fill completely. Putting a standard valve in the high pressure side will result in a dangerous, destroyed valve when you use CO2. This new BACK UP AIR FILLER solves all these problems. Uses your regulator to maintain the preset pressures. Use for unexpected emergencies or full time without last minute bottle or regulator modification. PICTURE SHOWN FOR EXAMPLE ONLY. BOTTLE, REGULATOR and GAUGE NOT INCLUDED.
$24.99 -
PC550 CO2 BOTTLE MOUNT-BOTTLE TO ROLL BAR
$49.99 Add to cart
Product DetailsPC550 CO2 BOTTLE MOUNT-BOTTLE TO ROLL BAR
Billet aluminum mount for standard 2″ diameter 10 oz. CO2 bottle. Mounts to roll bar to fit 1 ¼” to 1 ¾” tubing.
$49.99 -
PC540 CO2 BOTTLE MOUNT – BOTTLE TO FLAT SURFACE
$69.99 Add to cart
Product DetailsPC540 CO2 BOTTLE MOUNT – BOTTLE TO FLAT SURFACE
For 2.5 lb, 4 3/8″ diameter bottle. Polished CO2 Bottle Mount. Mounts to flat surface.
$69.99 -
PC310 CO2 / AIR SOLENOID (3-WAY)
$79.49 Add to cart
Product DetailsPC310 CO2 / AIR SOLENOID (3-WAY)
12 or 16 volt, Normally open or normally closed operation. Three 1/8″ NPT ports. One IN, one OUT and one EXHAUST. Manual override button. Power and Ground Lead wires. Used on most CO2 / AIR devices. 125 psi maximum.
$79.49 -
PC410 CO2 / AIR SOLENOID WITH FLOW CONTROLS (4 WAY)
$134.99 Add to cart
Product DetailsPC410 CO2 / AIR SOLENOID WITH FLOW CONTROLS (4 WAY)
12 or 16 volt, Normally open or normally closed operation. Four 1/8″ NPT ports. One IN, two OUT and one EXHAUST. Individual flow controls for each OUT port allow you to contol the rate the air flows. Manual override button. Power and Ground Lead wires. Commonly used on Starting line controls and Throttle Stops. 125 psi maximum.
$134.99 -
PC315 90 DEGREE SWIVEL FITTING
$8.99 Add to cart
Product DetailsPC315 90 DEGREE SWIVEL FITTING
¼” pipe to ¼” hose quick connect. (actual product may vary slightly from image).
$8.99 -
PC300 90 DEGREE SWIVEL FITTING
$8.99 Add to cart
Product DetailsPC300 90 DEGREE SWIVEL FITTING
1/8″ pipe to ¼” hose quick connect (actual product may vary slightly from image).
$8.99 -
PC290 STRAIGHT FITTING
$7.99 Add to cart
Product DetailsPC290 STRAIGHT FITTING
1/8″ pipe to ¼” hose quick connect. (actual product may vary slightly from image)
$7.99 -
PC295 STRAIGHT FITTING
$7.99 Add to cart
Product DetailsPC295 STRAIGHT FITTING
¼” pipe to ¼” hose quick connect.(actual product may vary slightly from image)
$7.99 -
PC275 “T” 1/4″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99 Add to cart
Product DetailsPC275 “T” 1/4″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
Connect to your CO2 regulator to run two devices on the same bottle.
$9.99 -
PC280 “T” 1/8″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99 Add to cart
Product DetailsPC280 “T” 1/8″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
Connect to your CO2 regulator to run two devices on the same bottle.
$9.99 -
PC125 CO2 LINE KIT
$29.99 Add to cart
Product DetailsPC125 CO2 LINE KIT
10 ft of 1/4″ OD high pressure CO2 line with (1) 1/4″ NPT to 1/4″ quick disconnect & (1) 1/8″ NPT to 1/4″ quick disconnect fitting
$29.99 -
PC130 CO2 LINE
$29.99 Add to cart
Product DetailsPC130 CO2 LINE
20′ of 1/4″ OD high pressure line. Designed for use with “Quick Disconnect” fittings.
$29.99 -
PC100C PRESSURE RUPTURE DISC, FEMALE FOR CO2 BOTTLE VALVE
$19.99 Add to cart
Product DetailsPC100C PRESSURE RUPTURE DISC, FEMALE FOR CO2 BOTTLE VALVE
Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 13/16″ wrench flats (CHROME). Acceptable replacement for PC100.
** OUT OF STOCK **
$19.99 -
PC110 PRESSURE RUPTURE DISC, MALE FOR CO2 BOTTLE VALVE
$12.99 Add to cart
Product DetailsPC110 PRESSURE RUPTURE DISC, MALE FOR CO2 BOTTLE VALVE
Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 5/8″ wrench flats.
$12.99 -
SW9000 COIL CORD
$29.99 Add to cart
Product DetailsSW9000 COIL CORD
Black 18 gauge, 2 wire for use with one switch. Extends to 6 foot. 15 AMP rating.
$29.99 -
SW8100 POWER DISTIBUTION BLOCK
$42.99 Add to cart
Product DetailsSW8100 POWER DISTIBUTION BLOCK
Ideal to connect to your main power supply or ground and distribute to eight stainless steel terminals. 3/8″ post. Rated at 48 volts DC. Base is glass filled nylon. Mounting is 2.5″ center to center.
$42.99 -
CPP5275 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (BLACK POWDER COATED SOLENOID)
$174.99 Add to cart
Product DetailsCPP5275 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (BLACK POWDER COATED SOLENOID)
This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED)$174.99 -
SN5275 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (BLACK POWDER COATED SOLENOID)
$174.99 Add to cart
Product DetailsSN5275 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (BLACK POWDER COATED SOLENOID)
This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED)$174.99 -
CPP5250 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (YELLOW ZINC, GOLD COLORED SOLENOID W/BLACK DECAL)
$164.99 Add to cart
Product DetailsCPP5250 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (YELLOW ZINC, GOLD COLORED SOLENOID W/BLACK DECAL)
This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED)$164.99 -
SN5250 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (YELLOW ZINC, GOLD COLORED SOLENOID W/BLACK DECAL)
$164.99 Add to cart
Product DetailsSN5250 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (YELLOW ZINC, GOLD COLORED SOLENOID W/BLACK DECAL)
This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED)$164.99 -
SN5200 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
$164.99 Add to cart
Product DetailsSN5200 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED)$164.99 -
CPP7000 ALL ELECTRIC 2-SPEED SHIFT KIT, HEAVY DUTY (SOLENOID)
$179.99 Add to cart
Product DetailsCPP7000 ALL ELECTRIC 2-SPEED SHIFT KIT, HEAVY DUTY (SOLENOID)
This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift. This specialty unit can replace the SN5000FC and SN5000RC if necessary for your application. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables and Hurst Quarter Stick II with Rear Exit Cable. Aluminum shifter cover will not work with this model. On Hurst Quarter Stick II, neutral safety switch has to be trimmed.
$179.99 -
SN7000 ALL ELECTRIC 2-SPEED SHIFT KIT, HEAVY DUTY (SOLENOID)
$179.99 Add to cart
Product DetailsSN7000 ALL ELECTRIC 2-SPEED SHIFT KIT, HEAVY DUTY (SOLENOID)
This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift. This specialty unit can replace the SN5000FC and SN5000RC if necessary for your application. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables and Hurst Quarter Stick II with Rear Exit Cable. Aluminum shifter cover will not work with this model. On Hurst Quarter Stick II, neutral safety switch has to be trimmed.
$179.99 -
CPP7600 OVERSIZED HEAVY-DUTY SOLENOID
$169.99 Add to cart
Product DetailsCPP7600 OVERSIZED HEAVY-DUTY SOLENOID
This oversized solenoid produces the extra force necessary for heavy-duty applications and hard-to-shift shifters and transmissions. Ideal for shifters with extra-long cables that make them hard to shift. This specialty unit can be a substitute for the SN5000FC and SN7000. The aluminum shifter cover will work with this model. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables.
$169.99 -
SN7600 OVERSIZED HEAVY-DUTY SOLENOID
$169.99 Add to cart
Product DetailsSN7600 OVERSIZED HEAVY-DUTY SOLENOID
This oversized solenoid produces the extra force necessary for heavy-duty applications and hard-to-shift shifters and transmissions. Ideal for shifters with extra-long cables that make them hard to shift. This specialty unit can be a substitute for the SN5000FC and SN7000. The aluminum shifter cover will work with this model. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables.
$169.99 -
CPP6000 2-SPEED SPRING SHIFT KIT FOR MOST 2-SPEED SHIFTERS
$149.99 Add to cart
Product DetailsCPP6000 2-SPEED SPRING SHIFT KIT FOR MOST 2-SPEED SHIFTERS
Solenoid / Spring shifter activator. Electric activated shifters give you consistent, hands fee shifting. Low amperage draw, spring activated shift kit for 2 speed transmissions. Mounted to your shifter, the bracket works with B&M ProStick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cable, and Hurst Quarter Stick II with Rear Exit Cable. Connect to your RPM Activated Switch or Timer for reliable shifting.
$149.99 -
SN6000 2-SPEED SPRING SHIFT KIT FOR MOST 2-SPEED SHIFTERS
$149.99 Add to cart
Product DetailsSN6000 2-SPEED SPRING SHIFT KIT FOR MOST 2-SPEED SHIFTERS
Solenoid / Spring shifter activator. Electric activated shifters give you consistent, hands fee shifting. Low amperage draw, spring activated shift kit for 2 speed transmissions. Mounted to your shifter, the bracket works with B&M ProStick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cable, and Hurst Quarter Stick II with Rear Exit Cable. Connect to your RPM Activated Switch or Timer for reliable shifting.
$149.99 -
SN5070 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
$334.99 Add to cart
Product DetailsSN5070 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
Convert your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. New and improved for 2018, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets. (SHIFTER NOT INCLUDED)
ATTENTION: Not recommended for Ford C4 and C6 transmissions with full manual valve body with the line pressure set above 200 P.S.I.. These transmissions at high pressure create a load greater than these electric solenoids can handle. The best choice for these heavy-duty loads is the SN5072 Heavy-Duty electric kit or the SA4070 CO2/Air Kit.
$334.99 -
CPP5072 HEAVY DUTY 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
$359.99 Add to cart
Product DetailsCPP5072 HEAVY DUTY 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
This Heavy Duty version of the original SN5070 is designed for hard shifting shifters. It also features a redesigned bracket for easier installation.
Converts your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes Heavy Duty solenoid, safety switch, relays, handle attachment and brackets.
(SHIFTER NOT INCLUDED)$359.99 -
SN5072 HEAVY DUTY 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
$359.99 Add to cart
Product DetailsSN5072 HEAVY DUTY 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
This Heavy Duty version of the original SN5070 is designed for hard shifting shifters. It also features a redesigned bracket for easier installation.
Converts your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes Heavy Duty solenoid, safety switch, relays, handle attachment and brackets.
(SHIFTER NOT INCLUDED)$359.99 -
SN5055 ALL ELECTRIC 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$314.99 Select options This product has multiple variants. The options may be chosen on the product page
Product DetailsSN5055 ALL ELECTRIC 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to your shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay.
(SHIFTER NOT INCLUDED)$314.99 -
SN5057 ALL ELECTRIC 3-SPEED SHIFT KIT, FORWARD SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$314.99 Select options This product has multiple variants. The options may be chosen on the product page
Product DetailsSN5057 ALL ELECTRIC 3-SPEED SHIFT KIT, FORWARD SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to B&M Pro Stick or Hurst quarter Stick shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay.
(SHIFTER NOT INCLUDED)$314.99 -
CPP4200 ALL ELECTRIC 2 SPEED STANDARD PATTERN SHIFT KIT FOR TURBO ACTION CHEETAH SCS SHIFTER
$189.99 Add to cart
Product DetailsCPP4200 ALL ELECTRIC 2 SPEED STANDARD PATTERN SHIFT KIT FOR TURBO ACTION CHEETAH SCS SHIFTER
Hands-free automated shifting for accurate and consistent shift points. NO CO2 Bottle and Regulator needed. Wire into any RPM Switch, Push Button or Timer. Kit includes HEAVY DUTY solenoid for extra hard hitting, Stainless Steel Bracket and Heavy Duty relay. Easy Installation. Made in the U.S.A. (SHIFTER NOT INCLUDED)
$189.99 -
SN4200 ALL ELECTRIC 2 SPEED STANDARD PATTERN SHIFT KIT FOR TURBO ACTION CHEETAH SCS SHIFTER
$189.99 Add to cart
Product DetailsSN4200 ALL ELECTRIC 2 SPEED STANDARD PATTERN SHIFT KIT FOR TURBO ACTION CHEETAH SCS SHIFTER
Hands-free automated shifting for accurate and consistent shift points. NO CO2 Bottle and Regulator needed. Wire into any RPM Switch, Push Button or Timer. Kit includes HEAVY DUTY solenoid for extra hard hitting, Stainless Steel Bracket and Heavy Duty relay. Easy Installation. Made in the U.S.A. (SHIFTER NOT INCLUDED)
$189.99 -
CPP4000 CO2 2-SPEED SHIFT KIT FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$159.99 Add to cart
Product DetailsCPP4000 CO2 2-SPEED SHIFT KIT FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
Hands free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 shift. Includes cylinder, solenoid, bracket, airline and fittings. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
$159.99 -
SA4000 CO2 2-SPEED SHIFT KIT FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$159.99 Add to cart
Product DetailsSA4000 CO2 2-SPEED SHIFT KIT FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
Hands free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 shift. Includes cylinder, solenoid, bracket, airline and fittings. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
$159.99 -
CPP5400 CO2 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
$159.99 Add to cart
Product DetailsCPP5400 CO2 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
Hands- free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 shift. Includes cylinder, solenoid, airline and fittings. A CO2 bottle and regulator is a required option.
(SHIFTER NOT INCLUDED)$159.99 -
SA5400 CO2 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
$159.99 Add to cart
Product DetailsSA5400 CO2 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
Hands- free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 shift. Includes cylinder, solenoid, airline and fittings. A CO2 bottle and regulator is a required option.
(SHIFTER NOT INCLUDED)$159.99 -
CPP4055 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$359.99 Add to cart
Product DetailsCPP4055 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
Hands-free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 and 2-3 shift. Simple conversion to Shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, CO2 cylinder, handle attachments and adapters and bracket. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
$359.99 -
SA4055 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$359.99 Add to cart
Product DetailsSA4055 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
Hands-free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 and 2-3 shift. Simple conversion to Shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, CO2 cylinder, handle attachments and adapters and bracket. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
$359.99 -
CPP4070 CO2 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$359.99 Add to cart
Product DetailsCPP4070 CO2 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
NEW AND IMPROVED FOR 2020. Laser-cut Stainless Steel bracket that makes this kit stronger and easier to install than the previous model. Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
$359.99 -
SA4070 CO2 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$359.99 Add to cart
Product DetailsSA4070 CO2 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
NEW AND IMPROVED FOR 2020. Laser-cut Stainless Steel bracket that makes this kit stronger and easier to install than the previous model. Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
$359.99 -
CPP4075 CO2 2, 3, OR 4-SPEED SHIFT KIT, STANDARD FORWARD OR REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$559.99 Add to cart
Product DetailsCPP4075 CO2 2, 3, OR 4-SPEED SHIFT KIT, STANDARD FORWARD OR REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. The cylinder-operated shifter makes your 1-2 shift for a 2-speed and your 2-3, and 3-4 shift for your 3 or 4 speed transmission without inhibiting your ability to shift manually. Included “Elite RPM Switch” prevents accidental activation from high gear into neutral, even if engine returns to shift RPM. Safety Switch prevents inadvertent activation from park or neutral into gear. Includes Digital Delay #1067 RPM Switch, cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. Can be converted to a reverse shift pattern if your transmission changes. A CO2 bottle and regulator is a required option.
OPTIONS AND THINGS TO CONSIDER:
- Any forward pattern transmission using this kit MUST be controlled by a smart RPM switch, which is included in the SA4075 kit.
- If you have a reverse pattern transmission, order the SA4070 which can be controlled by any RPM activated switch.
- If you already own a smart RPM switch, that can be programmed to limit the number of shifts, you can buy this kit without the RPM switch by ordering a SA4070, and moving one airline, which converts it to a forward pattern. (SHIFTER NOT INCLUDED)
$559.99 -
SA4075 CO2 2, 3, OR 4-SPEED SHIFT KIT, STANDARD FORWARD OR REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$559.99 Add to cart
Product DetailsSA4075 CO2 2, 3, OR 4-SPEED SHIFT KIT, STANDARD FORWARD OR REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. The cylinder-operated shifter makes your 1-2 shift for a 2-speed and your 2-3, and 3-4 shift for your 3 or 4 speed transmission without inhibiting your ability to shift manually. Included “Elite RPM Switch” prevents accidental activation from high gear into neutral, even if engine returns to shift RPM. Safety Switch prevents inadvertent activation from park or neutral into gear. Includes Digital Delay #1067 RPM Switch, cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. Can be converted to a reverse shift pattern if your transmission changes. A CO2 bottle and regulator is a required option.
OPTIONS AND THINGS TO CONSIDER:
- Any forward pattern transmission using this kit MUST be controlled by a smart RPM switch, which is included in the SA4075 kit.
- If you have a reverse pattern transmission, order the SA4070 which can be controlled by any RPM activated switch.
- If you already own a smart RPM switch, that can be programmed to limit the number of shifts, you can buy this kit without the RPM switch by ordering a SA4070, and moving one airline, which converts it to a forward pattern. (SHIFTER NOT INCLUDED)
$559.99
