New Products

Showing all 23 results

  • PC2010 DUAL OUTPUT CO2 ADJUSTABLE REGULATOR W/ GAUGES

    $199.00

    Dual output regulator allows you to connect to one CO2 bottle and have two different output pressures. One side is adjustable from 0-150 PSI and the other side is adjustable from 0-400 PSI.
    Includes two 1/4″ hose, 90-degree swivel, Push To Connect fittings.

  • PC2042 2″ CO2 Bottle and 85 PSI Regulator

    $159.99

    10oz. D.O.T. certified CO2 Bottle with valve and a Single Gauge. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years. 
      
    ** OUT OF STOCK **

  • PC2082 2″ CO2 Bottle and 150 PSI Regulator

    $169.99

    10oz. D.O.T. certified CO2 Bottle with valve and a Dual gauge, Adjustable 0-150 psi Regulator.  This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years. 
      
    ** OUT OF STOCK **

  • PC750 Electric CO2 Shut Off Valve

    $93.99

    Wires into ignition switch shutting off air supply to air components when not in use. Works with single or dual gauge regulators on low-pressure side.

  • TC680 DRAGSTER CAGE TOOL HOLDER

    $349.00

    Designed for the Sportsman size dragster cages, this tool holder sets on top the cage and has plenty of storage room and assorted holders for Spark Plugs, Allen Wrenches, Screw Drivers, Air tools, etc. Also generous trays for Oils and Aerosols. The tower has large bar magnets on both sides to allow you to place your wrenches and other metallic tools in a convenient, quick grab location. A built in safety strap is included to fasten the unit to your cage if desired.

  • TC780 SPARK PLUG HOLDER

    $34.95

    16 Plug Spark Plug Holder. Designed to hold the most common plugs used in motorsport racing. Labeled for easy reference.

  • NC6200 Bump Box

    $199.99

    The addition of an Outlaw Bump Box allows for a smooth transition during the drag-strip staging process. Critical to cars that need to rev up before final staging such as turbo cars but also used by many non-turbo bracket racers. Being able to slide through the pre-stage beams and into the staged beams with precise tuning, cuts down on rocking, bumping and red-light starts. This box is easy to use. Simple adjustments can be made to accommodate different tracks, power levels, and rpms. This one-touch operation results in better focus, consistent launching, and better reaction times.

    With the included relay the box will interrupt either the positive or negative wire on the Trans-Brake solenoid. When the Bump button is released ( not included ), it starts the timer, opens the relay, then closes the relay when the timer times out. The amount of time determines the “bump” distance.

  • 1BCL WINDOW CLEANER

    $11.99

    Clear One Window Cleaner is a non-abrasive cleaner made specifically for plastic materials. It works by sealing pores in plastic surfaces with a micro-thin layer of glossy, protective wax that allows the plastic to become resistant to debris, oil, scratches, and yellowing. Clear One cleaner also has anti-static properties to help repel dust and lint. This cleaner is easy to use — just spray on and wipe off. No buffing, rubbing, or multi-step applications are required to apply. This is the perfect cleaner for Clear One polycarbonate windows.

  • Tool tray

    TC585 TOOL TRAY w/ DOMINATOR CARB RING

    $120.99

    Engine top tool tray with carburetor ring for Dominator ( 4500 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc. Carb ring comes separate and can be left off for shop use or non carburetor engines.

  • Tool tray

    TC580 TOOL TRAY w/ STANDARD CARB RING

    $120.99

    Engine top tool tray with carburetor ring for standard ( 4150 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc.. Carb ring comes separate and can be left off for shop use or non carburetor engines.

  • PC3100 ENGINE LEAN OUT KIT w / BRACKET

    $94.99

    This model includes a heavy duty aluminum bracket.
    Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10′ X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.
    TEMPORARILY, air hoses may vary in color.

  • PC4000 – AIR COMPRESSOR , 12 Volt

    $429.99

    ELIMINATE YOUR CO2 BOTTLE AND REGULATOR

    Mounted in your vehicle, it replaces your CO2 Bottle and regulator. No more filling and maintaining your bottle. Run your Air shifter, Starting Line Controller, Throttle stop and other CO2 / Air devices that operate in the range of 90-120 PSI. This includes most all devices currently used in racing and off road applications.

    Includes a “No Kink” Polyurethane coiled hose and tire chuck to maintain your tire pressure, eliminating the need to haul your portable air tank.

    Unlike many 12 volt compressors on the market, our customized unit has a 1/4 gallon recovery tank to supply that volume needed to activate many Air devices used in racing.

    Compact size, approximately 10″ x 7″ x 4″ and net weight of only 10 lbs.

      
    ** OUT OF STOCK **

  • TC272 GLOVE DISPENSER

    $27.49

    A great way to hold and dispense your latex disposable gloves. Holds most boxed disposable gloves. Mounting hardware included. (Wall mount)

  • SN5200WSMB 2-SPEED ELECTRIC SHIFTER WITH SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)

    $679.99

    Side or Floor Mounting, ideal for dragsters and roadsters.

    Hands-free automated shifting for accurate and consistent shift points. Solenoid mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes complete shifter package, solenoid, solenoid mount, and relay.

    – Rear Cable Exit for P/G Transmissions
    – Neutral Safety Switch
    – Reverse Lock Out
    – Includes B&M Magnum Grip Shifter & SHIFNOID Solenoid
    – Includes P/G Shift Arm
    – Includes 8′ Severe Duty Cable
    Optional 70469 Cable Bracket Needed for “Door Cars”
    Optional 80884 Mounting Bracket for Floor Mounting Shifter

     

  • CMW9125 THROTTLE STOP / STARTING LINE CONTROLLER

    $243.99

    A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Standard bore cylinder for light-weight and compact fit. 2” stroke length.

  • TC540 JR. DRAGSTER WORK STAND HOLDER

    $93.49

    Holds the most popular brands of “Jr. Dragster Work Stands” securely to your wall or floor. High Strength ABS material, light weight, scratch resistant. Also works well for lawn chairs and small folding tables. Approx. Dimensions: 32″ x 7″ x 18″.

  • TC510 DRUM PUMP HOLDER

    $31.34

    Store your siphon drum pump with out having to lift the pump clear up and out of the holder. Can mount close to the ceiling. ABS storage bracket keeps your pump in place for safe storage. PUMP NOT INCLUDED. (Wall Mount)

  • TC262 HYBRID PRO HANS® HOLDER

    $45.64

    Safely store your HANS “HYBRID PRO” Head & Neck Restraint.

  • TC560 TRAILER-AID® STORAGE POUCH

    $28.59

    Wall Mount bracket safely stores your TRAILER AID ramp device.

     

  • SN7000 ALL ELECTRIC 2-SPEED SHIFT KIT, HEAVY DUTY (SOLENOID)

    $179.99

    This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift. This specialty unit can replace the SN5000FC and SN5000RC if necessary for your application. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables and Hurst Quarter Stick II with Rear Exit Cable. Aluminum shifter cover will not work with this model. On Hurst Quarter Stick II, neutral safety switch has to be trimmed.

  • SN7600 OVERSIZED HEAVEY-DUTY SOLENOID

    $169.99

    This oversized solenoid produces the extra force necessary for heavy-duty applications and hard-to-shift shifters and transmissions.  Ideal for shifters with extra-long cables that make them hard to shift.  This specialty unit can be a substitute for the SN5000FC and SN7000.  The aluminum shifter cover will work with this model.  For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables.

  • SN5072 HEAVY DUTY 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN

    $359.99

    This Heavy Duty version of the original SN5070 is designed for hard shifting shifters. It also features a redesigned bracket for easier installation.
    Converts your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes Heavy Duty solenoid, safety switch, relays, handle attachment and brackets.
    (SHIFTER NOT INCLUDED)

  • SN4200 ALL ELECTRIC 2 SPEED STANDARD PATTERN SHIFT KIT FOR TURBO ACTION CHEETAH SCS SHIFTER

    $189.99

    Hands-free automated shifting for accurate and consistent shift points. NO CO2 Bottle and Regulator needed. Wire into any RPM Switch, Push Button or Timer. Kit includes HEAVY DUTY solenoid for extra hard hitting, Stainless Steel Bracket and Heavy Duty relay. Easy Installation. Made in the U.S.A. (SHIFTER NOT INCLUDED)