Shop by Brand
Showing all 156 results
-
Shifnoid (87)
-
Dial-Rite (6)
-
Flaming River (11)
-
Strange Engineering (1)
-
Clear One Racing (57)
PLEASE NOTE: in many cases the stated Shipping charges quoted in the shopping cart will be reduced. Many Clear One products are large and bulky. This allows us to consolidate multiple products into lesser number of packages. For customers ordering multiple Clear One products we will repackage and place the smaller items in the boxes with the larger items. In most cases this will dramatically reduce the shipping charges well below the amount quoted in the shopping cart. We will automatically ship in the least expensive way possible. For an accurate freight quote, please call your order in to 800-279-3724. Upon determination, any overage charged to your credit card will be immediately refunded. -
PC2010 DUAL OUTPUT CO2 ADJUSTABLE REGULATOR W/ GAUGES
$199.00Dual output regulator allows you to connect to one CO2 bottle and have two different output pressures. One side is adjustable from 0-150 PSI and the other side is adjustable from 0-400 PSI.
Includes two 1/4″ hose, 90-degree swivel, Push To Connect fittings. -
PC2042 2″ CO2 Bottle and 85 PSI Regulator
$159.9910oz. D.O.T. certified CO2 Bottle with valve and a Single Gauge. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
** OUT OF STOCK ** -
PC2082 2″ CO2 Bottle and 150 PSI Regulator
$169.9910oz. D.O.T. certified CO2 Bottle with valve and a Dual gauge, Adjustable 0-150 psi Regulator. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
** OUT OF STOCK ** -
PC750 Electric CO2 Shut Off Valve
$93.99Wires into ignition switch shutting off air supply to air components when not in use. Works with single or dual gauge regulators on low-pressure side.
-
SN5072WS ALL ELECTRIC HEAVY DUTY 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
$699.99B&M Pro Ratchet (part number 80842) with a Shifnoid SN5072 Heavy Duty electric shift kit, makes a hands-free automated shifter for accurate and consistent shift points. Extra strength for hard to pull shifters sometimes caused by long shifter cables. New and improved for 2020, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. 12 and 16 volts compatible. A simple circuit prevents accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets.
-
NC6200 Bump Box
$199.99The addition of an Outlaw Bump Box allows for a smooth transition during the drag-strip staging process. Critical to cars that need to rev up before final staging such as turbo cars but also used by many non-turbo bracket racers. Being able to slide through the pre-stage beams and into the staged beams with precise tuning, cuts down on rocking, bumping and red-light starts. This box is easy to use. Simple adjustments can be made to accommodate different tracks, power levels, and rpms. This one-touch operation results in better focus, consistent launching, and better reaction times.
With the included relay the box will interrupt either the positive or negative wire on the Trans-Brake solenoid. When the Bump button is released ( not included ), it starts the timer, opens the relay, then closes the relay when the timer times out. The amount of time determines the “bump” distance.
-
1BCL WINDOW CLEANER
$11.99Clear One Window Cleaner is a non-abrasive cleaner made specifically for plastic materials. It works by sealing pores in plastic surfaces with a micro-thin layer of glossy, protective wax that allows the plastic to become resistant to debris, oil, scratches, and yellowing. Clear One cleaner also has anti-static properties to help repel dust and lint. This cleaner is easy to use — just spray on and wipe off. No buffing, rubbing, or multi-step applications are required to apply. This is the perfect cleaner for Clear One polycarbonate windows.
-
TC585 TOOL TRAY w/ DOMINATOR CARB RING
$120.99Engine top tool tray with carburetor ring for Dominator ( 4500 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc. Carb ring comes separate and can be left off for shop use or non carburetor engines.
-
TC580 TOOL TRAY w/ STANDARD CARB RING
$120.99Engine top tool tray with carburetor ring for standard ( 4150 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc.. Carb ring comes separate and can be left off for shop use or non carburetor engines.
-
PC3000 ENGINE LEAN OUT KIT
$79.99Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10' X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.
TEMPORARILY, air hose may vary in color. -
PC3100 ENGINE LEAN OUT KIT w / BRACKET
$94.99This model includes a heavy duty aluminum bracket.
Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10′ X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.
TEMPORARILY, air hoses may vary in color. -
PC4000 – AIR COMPRESSOR , 12 Volt
$389.99ELIMINATE YOUR CO2 BOTTLE AND REGULATOR
Mounted in your vehicle, it replaces your CO2 Bottle and regulator. No more filling and maintaining your bottle. Run your Air shifter, Starting Line Controller, Throttle stop and other CO2 / Air devices that operate in the range of 90-120 PSI. This includes most all devices currently used in racing and off road applications.
Includes a “No Kink” Polyurethane coiled hose and tire chuck to maintain your tire pressure, eliminating the need to haul your portable air tank.
Unlike many 12 volt compressors on the market, our customized unit has a 1/4 gallon recovery tank to supply that volume needed to activate many Air devices used in racing.
Compact size, approximately 10″ x 7″ x 4″ and net weight of only 10 lbs.
** OUT OF STOCK ** -
TC272 GLOVE DISPENSER
$27.49A great way to hold and dispense your latex disposable gloves. Holds most boxed disposable gloves. Mounting hardware included. (Wall mount)
-
SN5070WS All ELECTRIC 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
$649.99B&M Pro Ratchet (part number 80842) with a Shifnoid SN5070 electric shift kit, makes a hands-free automated shifter for accurate and consistent shift points. New and improved for 2018, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevent accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets.
(CO2 version available – call 1-800-279-3724)ATTENTION: Not recommended for Ford C4 and C6 transmissions with full manual valve body with the line pressure set above 200 P.S.I.. These transmissions at high pressure create a load greater than these electric solenoids can handle. The best choice for these heavy-duty loads is the SN5072 Heavy-Duty electric kit or the SA4070 CO2/Air Kit.
-
SN5200WSMB 2-SPEED ELECTRIC SHIFTER WITH SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
$679.99Side or Floor Mounting, ideal for dragsters and roadsters.
Hands-free automated shifting for accurate and consistent shift points. Solenoid mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes complete shifter package, solenoid, solenoid mount, and relay.
– Rear Cable Exit for P/G Transmissions
– Neutral Safety Switch
– Reverse Lock Out
– Includes B&M Magnum Grip Shifter & SHIFNOID Solenoid
– Includes P/G Shift Arm
– Includes 8′ Severe Duty Cable
– Optional 70469 Cable Bracket Needed for “Door Cars”
– Optional 80884 Mounting Bracket for Floor Mounting Shifter -
SN5250WSMB 2-SPEED ELECTRIC SHIFTER W/HEAVY DUTY SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
$699.99Side or Floor Mounting, ideal for dragsters and roadsters.
Hands-free automated shifting for accurate and consistent shift points. Solenoid mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button, and the solenoid-operated shifter makes your 1-2 shift. Includes complete shifter package, heavy-duty solenoid, ideal for long cables and hard-to-shift transmissions, solenoid mount, and relay.
– Rear Cable Exit for P/G Transmissions
– Neutral Safety Switch
– Reverse Lock Out
– Includes B&M Magnum Grip Shifter & SHIFNOID Solenoid
– Includes P/G Shift Arm
– Includes 8′ Severe Duty Cable
– Optional 70469 Cable Bracket Needed for “Door Cars”
– Optional 80884 Mounting Bracket for Floor Mounting Shifter -
Strange Engineering
Contact Contender Performance Products, Inc. for all of your Strange Engineering needs! Call 740-927-0060 or 800-279-3724.
-
SW7010 TRANSBRAKE OR LINE LOCK SWITCH w/COIL CORD
$52.99Ideal for steering wheel mounting. Heavy duty, 18 AWG coil cord. Extends to 6 Foot. 15 AMP rating.
-
PC2004 CO2 REGULATOR, 85 lb. FIXED PRESSURE w/GAUGE
$84.99Single gauge shows bottle pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
-
PC2008 CO2 REGULATOR, ADJUSTABLE PRESSURE w/DUAL GAUGES
$89.99Dual gauge adjustable 0-150 lb, shows bottle and line pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
-
PC2020 CO2 Bottle, 10 OZ. WITH STANDARD VALVE
$89.99D.O.T. certified lightweight bottle with standard valve. 2″ diameter. “This bottle does NOT need re-certified every 1 or 5 years. The PC2020, 10 oz. CO2 bottle is D.O.T. exempt from periodic retesting.
** OUT OF STOCK **
-
Sale!
PC2030 CO2 BOTTLE, 2.5 LB. WITH STANDARD VALVE
$99.99DOT certified bottle with standard valve. 4 3/8″ diameter.
Quantity limited. -
PC2022 CO2 BOTTLE, 10 OZ. WITH STRAIGHT VALVE
$89.99DOT certified lightweight bottle with lightweight straight through valve. 2″ diameter.
** OUT OF STOCK ** -
PC2032 CO2 BOTTLE, 2.5 LB. WITH STRAIGHT VALVE
$129.99DOT certified bottle with straight through valve. 4 3/8″ diameter.
-
PC112 C02 BOTTLE RACKS
$46.49Safely store 2 standard 10 oz. bottles for transport. Non-marring individual bays keep bottles quiet. Measurements: 9″W x 9.5″H x 3.5″D. Weight: 1.2 lbs.(Wall Mount)
-
PC650 10oz CO2 Bottle Replacement Knob
$8.99Replacement knob for new style Sherwood Valve with male rupture disc. Mounting Hole dimensioned for 5/16″ valve stem.
-
CMW9100 THROTTLE STOP / STARTING LINE CONTROLLER
$287.49A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Standard bore cylinder for light-weight and compact fit. 2” stroke length.
-
CMW8900 THROTTLE STOP / STARTING LINE CONTROLLER
$297.49A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
-
CMW8925 THROTTLE STOP / STARTING LINE CONTROLLER
$317.49A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
-
CMW9125 THROTTLE STOP / STARTING LINE CONTROLLER
$243.99A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Standard bore cylinder for light-weight and compact fit. 2” stroke length.
-
CMW9000 THROTTLE STOP / STARTING LINE CONTROLLER
$248.99A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
-
CMW9025 THROTTLE STOP / STARTING LINE CONTROLLER
$268.99A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
-
SN5000 ALL ELECTRIC 2 SPEED SHIFT KIT FOR MOST 2 SPEED SHIFTERS
$129.99Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, bracket, and relay.
SN5000FC Shift Kit – fits B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, and TCI Thunderstick with Front Exit Cable Shifter. Forward Pattern 2 speed only. Replacement solenoid for FC kit (SN3400).
SN5000RC Shift Kit – Fits Hurst Quarter Stick II with Rear Exit Cable
Replacement solenoid for RC kit (SN3410) -
FR1501 71-72 PINTO MANUAL RACK & PINION
$299.99This manual rack & pinion is designed to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality, aluminum castings and chromed plated steel center tube. This unit weighs only 12lbs with steering specifications of 3.75 turns lock-to-lock; rack travel 5.25″; overall length 45 1/2 inches.
-
FR1503 5.0L MUSTANG MANUAL RACK & PINION STD. RATIO (1979-1993)
$299.99These kits are designed for the 5.0L (79-93) Mustang. These racks are ideal for road racing and other applications where a very responsive steering system is required.
Steering Specifications: STANDARD — 20:1 ratio, 4 turns lock to lock. Rack travel — 5.25″. Mounting position: 15-1/2″ center-to-center -
FR1520 5.0L MUSTANG MANUAL RACK & PINION QUICK RATIO (1979-1993)
$419.99This kit is designed for the 5.0L (79-93) Mustang. These racks are ideal for road racing and other applications where a very responsive steering system is required.
Steering Specifications: QUICK RATIO — 15;1 ratio, 3.3 turns lock-to-lock (25% faster than a standard unit). Rack travel — 5.25″. Mounting position: 15-1/2″ center-to-center -
FR1508 5.0L MUSTANG MANUAL RACK & PINION STD. RATIO (1994-2004)
$489.99These kits are designed for the 5.0L (94-04) Mustang (non-Modular engines). These racks are ideal for road racing and other applications where a very responsive steering system is required.
Steering Specifications: STANDARD — 20:1 ratio, 4 turns lock to lock). Rack travel — 5.25″. Mounting position: 15-1/2″ center-to-center -
FR1500 PERFORMANCE VEGA STYLE STEERING BOX
$569.99The Flaming River Performance Vega style steering box is an all NEW unit designed specifically for street rods. This box is 30% stronger than the OEM box and utilizes the latest technology with a smooth needle bearing design. This new design far outlasts the original bushing design of the 70's.
-
NCRPM3000 RPM SWITCH W/DELAY
$119.99Prevent premature RPM Switch activation due to tire spin or converter flash off the starting line. An additional circuit in the RPM switch provides a 1 second delay in the activation of the RPM Switch. This delay feature only prevents the RPM Switch from activating in the first second. It cannot be used as a delay box. Use for a variety of functions such as activating CO2 or electric shifters, Nitrous solenoids, shift lights, timing computers or anything that needs to be activated at a preset RPM. Switch is easily adjusted using optional plug in modules. 12 and 16 volt compatible, and will work with all ignition systems, except Magnetos. 8 cylinder only. Single coil only.
-
NCRPM1000 RPM SWITCH
$104.99Use for a variety of functions such as activating CO2 or electric shifters, Nitrous solenoids, shift lights, timing computers or anything that needs to be activated at a preset RPM. Switch is easily adjusted using optional plug in modules. 12 and 16 volt compatible, and will work with all ignition systems, except Magnetos. 8 cylinder only. Single coil only.
-
FR1010 MAGNETO & BATTERY KILL SWITCH (COMBO)
$199.99Dual circuit switch simultaneously shuts down both the battery and magneto. Waterproof spring-loaded design with silver plated brass contacts. Rated at 250 amps continuous service, 2,500 amps for 5 second surges. Accepted for NHRA/IHRA competition use. Furnished with an easy-grip T-handle, and anodized aluminum mounting bracket.
-
FR1003-2 THE BIG SWITCH WITH LEVER KIT
$149.99The lever kit allows for remote actuation of the Big Switch. The kit includes an 18″ long, diameter aluminum threaded rod, T-handle, mounting bracket and necessary hardware. A “push off” decal is included. Accepted for IHRA/NHRA competition use. Design Details
-
FR1003 THE BIG SWITCH
$139.99Top racers realize that using a low amp switch creates resistance and actually reduces power. Flaming River’s heavy duty battery disconnect switch is top of the line designed for complex electrical systems and 16 Volt batteries. Rated at 250 amps continuous service (12/16/24V) and 2500 amps for 5 second surges. The Big Switch is a spring-loaded, vibration resistant waterproof design. Accepted by most sanctioning bodies including IHRA/NHRA. Furnished with an easy-grip T-handle, anodized aluminum bracket and zinc plated mounting hardware.
Design Details (PDF) -
FR1800B MIL-SPEC UNIVERSAL JOINTS
$189.99These universal joints are manufactured to military specifications for aircraft and have become the select choice of drag racers due to the lightweight design. Lubricant-filled silicone boot provides maintenance-free operation for extended universal joint life. This boot is designed for high temperature environments with a continuous rating of 650° Fahrenheit. Please note nominal size is outside diameter. Not for street use. Specification & Performance Charts (PDF)
-
FR1820 STEEL PIN AND BLOCK U-JOINT (3/4″ x 3/4″ SMOOTH)
$149.99The preferred choice of drag racers for the sleek and lightweight designed steering systems.This block & pin universal joint is 3/4″ smooth X 3/4″ smooth – 1.000″ O.D.
NOTE: Racing design only, NOT recommended for street use.
(photo is for example only – sold individually) -
FR1821 STEEL PIN AND BLOCK U-JOINT (3/4″ SMOOTH x 9/16″ – 26)
$149.99The preferred choice of drag racers for the sleek and lightweight designed steering systems.This block & pin universal joint is 3/4″ smooth X 9/16″-26 – 1.000″ O.D.
NOTE: Racing design only, NOT recommended for street use.
(photo is for example only – sold individually) -
DRP2 DIAL-RITE “POCKET SIZE” WINDOW MARKER (Yellow)
$7.49The DIAL-RITE POCKET SIZE markers add convenience for carrying to write your “dial in” on your race car windows. Designed for Hi Visibility and easy, wipe-off removal with a dry rag, these products are designed for today’s polycarbonate, Lexan Margard, and assorted plastic windows as well as glass. Also commonly used for advertising and celebration, these multi-colored products will grab your attention. 1 oz.
Available in: White and Yellow.
-
DRP1 DIAL-RITE “POCKET SIZE” WINDOW MARKER (White)
$6.49The DIAL-RITE POCKET SIZE markers add convenience for carrying to write your “dial in” on your race car windows. Designed for Hi Visibility and easy, wipe-off removal with a dry rag, these products are designed for today’s polycarbonate, Lexan Marguard, and assorted plastic windows as well as glass. Also commonly used for advertising and celebration, these multi-colored products will grab your attention. 1 oz.
Available in: White and Yellow -
DRM2 DIAL-RITE WINDOW MARKER (yellow)
$9.99The DIAL-RITE markers add convenience for carrying to write your “dial in” on your race car windows. Designed for Hi Visibility and easy, wipe-off removal with a dry rag, these products are designed for today’s polycarbonate, Lexan Margard, and assorted plastic windows as well as glass. Also commonly used for advertising and celebration, these multi-colored products will grab your attention. 3 oz.
Available in: White and Yellow.
-
DRM1 DIAL-RITE WINDOW MARKER (white)
$8.99The DIAL-RITE markers add convenience for carrying to write your “dial in” on your race car windows. Designed for Hi Visibility and easy, wipe-off removal with a dry rag, these products are designed for today’s polycarbonate, Lexan Margard, and assorted plastic windows as well as glass. Also commonly used for advertising and celebration, these multi-colored products will grab your attention. 3 oz.
Available in: White and Yellow.
-
WRC2-WHEEL-RITE CHALK (Yellow)
$9.99The WHEEL-RITE line of chalk markers is the standard for marking and tracking your wheelie bar performance. Chassis tuning in a bottle. Designed for Hi Visibility, leaving an easy-to-see and read mark on the race track. No mess applicator. 3oz.
Available in: White and Yellow. -
WRC1-WHEEL-RITE CHALK (White)
$8.99The WHEEL-RITE line of chalk markers is the standard for marking and tracking your wheelie bar performance. Chassis tuning in a bottle. Designed for Hi Visibility, leaving an easy-to-see and read mark on the race track. No mess applicator. 3oz.
Available in: White and Yellow. -
TC540 JR. DRAGSTER WORK STAND HOLDER
$93.49Holds the most popular brands of “Jr. Dragster Work Stands” securely to your wall or floor. High Strength ABS material, light weight, scratch resistant. Also works well for lawn chairs and small folding tables. Approx. Dimensions: 32″ x 7″ x 18″.
-
TC510 DRUM PUMP HOLDER
$31.34Store your siphon drum pump with out having to lift the pump clear up and out of the holder. Can mount close to the ceiling. ABS storage bracket keeps your pump in place for safe storage. PUMP NOT INCLUDED. (Wall Mount)
-
TC359 CLEAR VINYL DOOR STRIPS FOR 8’x7′ OPENING
$299.99Clear vinyl strip doors are designed to keep dirt and dust from entering the door openings of your trailer as well as keeping air-conditioned trailers cool without closing up the doors. Can easily be trimmed for custom fit. Unique universal mount for installation to ceiling or wall. Industrial quality 8″ x .08″ verilon strips with a full 50% overlap.
For 8'x7' opening. -
TC159 CLEAR VINYL DOOR STRIPS FOR 4’x7′ OPENING
$189.99Clear vinyl strip doors are designed to keep dirt and dust from entering the door openings of your trailer as well as keeping air-conditioned trailers cool without closing up the doors. Can easily be trimmed for custom fit. Unique universal mount for installation to ceiling or wall. Industrial quality 8″ x .08″ verilon strips with a full 50% overlap.
For 4'x7' opening. -
TC158 CLEAR VINYL DOOR STRIPS FOR 4’x6′ OPENING
$179.99Clear vinyl strip doors are designed to keep dirt and dust from entering the door openings of your trailer as well as keeping air conditioned trailers cool without closing up the doors. Can easily be trimmed for custom fit. Unique universal mount for installation to ceiling or wall. Industrial quality 8″ x .08″ verilon strips with a full 50% overlap.
For 4'x6' opening. -
TC252 HANS® DEVICE HOLDER
$54.99Safely store your Hans “Sport Model” Head & Neck Restraint.( Not compatible with “Hybrid Pro” devices ) Measurements – 16″H x 14″W x 6″D (Wall Mount) DISCONTINUED, LIMITED SUPPLY AVAILABLE.
-
TC208 TORSION BAR RACK
$107.24The ideal way to store up to 12 torsion bars while in transit. 2″ diameter, scratch resistant holes protect against damage. Predrill to match your trailer wall studs. Measurements: Each piece: Approx. 34″W x 5.75″H x 4.25″D (Wall / Floor Mount)
-
TC206 CHASSIS STABILIZER BLADDER RACK
$27.49Clutter in the race trailer? Grab one of our Chassis Stabilizer Racks and safely store your stabilizer! Measurements – 2.25″D x 6.25″H x 23.5″W (Wall Mount)
-
TC182 PUSH BROOM HOLDER
$28.59One piece construction holds one push broom secure for travel. Measurements – 24″W x 10″H x 8″D (Wall Mount)
-
TC180 BROOM HOLDER
$24.19Keep your broom secure during travel, yet handy for easy clean ups. One piece construction holds a straight broom. Measurements – 13″W x 11″H x 5″D (Wall Mount)
-
TC152 CUP HOLDER
$21.99Great for RV’s, trucks, or trailers. Holds 2 cups. Measurements: 8″W x 3.5″H x 4″D Weight: 0.5 lbs.(Multiple Mounting Options
-
TC151 DELUXE HELMET BAY
$120.44Deluxe helmet bay with foam lining, apparel hook and storage shelf for neck collar, gloves, etc. Measurements: 15.5″W x 14″H x 13″D Weight: 7 lbs. (Wall Mount)
Also, see TC116 STANDARD HELMET BAY. -
TC116 STANDARD HELMET BAY
$87.99Single bay helmet storage with foam lining and apparel hook. Measurements: 15.5″W x 13″H x 13″D Weight: 5 lbs. (Wall Mount)
Also, see TC151 DELUXE HELMET BAY. -
TC148 JACK PAD POUCH
$31.34The jack pad pouch stores up to 2 pads and is designed for wall mounting for easy access and out of the way storage. Measurements: 15″W x 8.5″H x 2″D. Weight: 1.2 lbs.(Wall Mount)
-
TC249 NITROUS 10 LB FLOOR MOUNT BOTTLE RACKS (4 BAYS)
$108.34Safely stores 2 to 4, ten pound nitrous bottles safely for transport. Non-marring individual bays keep bottles quiet
-
TC149 NITROUS 10 LB FLOOR MOUNT BOTTLE RACKS (2 BAYS)
$65.99Safely stores 2 to 4, ten pound nitrous bottles safely for transport. Non-marring individual bays keep bottles quiet
-
TC147 JACK PADS (PAIR)
$59.94These 12″ x 12″ jack pads can be used for trailer tongue jacks, RV leveling jacks and much more, each pad has a 20,000 lb rating capacity and includes a non-skid surface and nylon rope handle. Measurements: 12″W x 12″H x .75″D. Nominal. Weight: 3.7 lbs. (each). 7.75 lbs. (pair).
-
TC146 JACK PAD
$32.44These 12″ x 12″ jack pads can be used for trailer tongue jacks, RV leveling jacks and much more, each pad has a 20,000 lb rating capacity and includes a non-skid surface and nylon rope handle. Measurements: 12″W x 12″H x .75″D. Nominal. Weight: 3.7 lbs. (each). 7.4 lbs. (pair).
-
TC145 SHATTERPROOF MIRROR
$21.99Made from 1/8″ High Impact mirror grade plastic material. Measurements: 9″W x 12″H x 0.125″D. Weight: 0.3 lbs. (Wall Mount)
-
TC144 STANDARD TIRE GAUGE POUCH
$20.89The tire gauge pouch stores your tire gauge when not in use. Great for mounting on the door cabinet for easy access. Fits standard tire gauges up to 3.25″ wide and 1.75″deep. Measurements: 3.3″W x 3.5″H x 2″D Weight: 0.5 lbs.(Wall/Floor Mount)
-
TC143 MAGNUM TIRE GAUGE POUCH
$25.29The tire gauge pouch stores your tire gauge when not in use. Great for mounting on the door cabinet for easy access. Fits large tire gauges up to 4.25″ wide and 1.75″deep. Measurements: 5.25″W x 3.5″H x 2.125″D Weight: 0.5 lbs.(Wall/Floor Mount)
-
TC142 HELMET HOOK
$18.69This universal helmet hook keeps your helmet within easy reach up and out of the way. Measurements: 2.5″W x 3.5″H x 6″D. Weight: 0.2 lbs. (Wall Mount)
-
TC141 PAPER TOWEL RACK
$21.99The paper towel rack is small enough to mount just about anywhere for easy access. Can be mounted vertically or horizontally. No bar to remove, simply bend sides outward and the paper towel roll will slide on. Measurements: 11.5″W x 4.5″H x 5″D. Weight: 0.5 lbs.(Wall/Door Mount)
-
TC156 DOOR / WALL CABINET WITH 2 ROLL PAPER TOWEL HOLDER
$153.99The base door/wall cabinet weighs only 9.7 pounds and includes 3 shelves to accommodate aerosol cans and other items similar in size along with a double roll paper towel holder. No bar to remove simply bend the sides outward and the paper towel roll will slide on. Measurements: 23″W x 37″H x 4.5″D. Weight: 9.7 lbs.
-
TC138 SMALL DOOR CABINET
$104.49The small door cabinet is ideal for limited space and is very light weight. It includes 2 shelves for aerosol cans and other items similar in size along with a single roll paper towel holder. No bar to remove, simply bend the sides outward and the paper towel roll will slide on. Measurements: 12″W x 23.3″H x 4.8″D. Weight: 4.6 lbs.
-
TC137 BASE DOOR / WALL CABINET
$129.79The base door/wall cabinet weighs only 9.5 pounds and includes 3 shelves to accommodate aerosol cans and other items similar in size. Measurements: 22.5″W x 32″H x 4.5″D Weight: 9.5 lbs.
-
TC134 FUNNEL HOLDER
$38.49Wall mounted unit stores triangular funnels up and out of the way. Measurements: 17″W x 3″H x 11″D. Weight: 0.8 lbs. (Wall Mount)
-
TC132 JACK POUCH
$108.89Wall-mounted unit stores race jacks up and out of the way for transport and storage. Designed for low-profile, lightweight, aluminum floor jacks. Maximum weight capacity is 68 lbs. Measurements: 18″W x 25.5″H x 5.5″D. Weight: 7.5 lbs. (Wall/Floor-mount for jacks over 42 lbs.)
-
TC130 CANOPY STRAPS (PAIR)
$71.49Fully adjustable 2″ straps and wall unit keeps your 10’x10′ and 10’x20′ canopy secure during travel. Measurements: 11.5″W x 4.5″H x 1″D
Weight: 2 lbs.(Wall Mount) -
TC128 COLLAPSIBLE CHAIR RACK
$59.94Rack holds 3 collapsible chairs. Closed bottom allows for wall storage. Measurements: Each level, 21.5″W x 4″H x 6.5″D Total Weight: 5 lbs.(Wall/Floor Mount)
-
TC129 MAGNUM COLLAPSIBLE CHAIR RACK
$73.69Designed for the large, oversized collapsible chairs including those with sun shields and foot rest. Rack holds 3 chairs.
Closed bottom allows for wall storage. Measurements: Each level, 26.5″W x 4″H x 8.5″D Total Weight: 8 lbs. (Wall/Floor Mount) -
TC120 OIL QUART RACKS (12 Quart)
$51.14Floor mounted racks keep your extra supply of oil neat and out of the way.
-
TC119 OIL QUART RACKS (6 Quart)
$39.04Floor mounted racks keep your extra supply of oil neat and out of the way.
-
TC118 AEROSOL CAN SHELVING (12 CAN)
$43.44Wall mounted lightweight racks to keep your aerosol cans neat and at your fingertips.
-
TC117 AEROSOL CAN SHELVING (8 CAN)
$37.94Wall mounted lightweight racks to keep your aerosol cans neat and at your fingertips.
-
TC115 UNIVERSAL CORD / HOSE HANGER
$18.69Stores electrical cords or air hoses for easy accessibility. Measurements: 4.5″W x 5″H x 4″D. Weight: 0.5 lbs.(Wall Mount)
-
TC112 C02 BOTTLE RACKS
$51.14Safely store 2 standard 10 oz. bottles for transport. Non-marring individual bays keep bottles quiet. Measurements: 9″W x 9.5″H x 3.5″D. Weight: 1.2 lbs.(Wall Mount)
-
TC111 FUEL JUG RACK (4 BAY)
$102.29Holds round or square fuel jugs securely in trailer for transport (four bay)
-
TC110 FUEL JUG RACK (3 BAY)
$87.99Holds round or square fuel jugs securely in trailer for transport (three bay)
-
TC109 FUEL JUG RACK (2 BAY)
$71.49Holds round or square fuel jugs securely in trailer for transport (single bay)
-
TC108 FUEL JUG RACK (1 BAY)
$54.99Holds round or square fuel jugs securely in trailer for transport (single bay)
-
TC106 DRAGSTER NOSECONE RACK
$87.99Fully adjustable nose cone holder that secures your nose for transport. Complete with rubber edge trim to protect your paint. Measurements: 10″W x 16″H x 2″D. Weight: 2.3 lbs. (Wall Mount)
-
TC104 CAR DUSTER POUCH
$33.54Store your car duster out of the way and keep it within reach. Measurements: 9’W x 12″H x 4″D. Weight: 1.5 lbs. (Wall Mount)
-
TC102 “D” CELL FLASHLIGHT HOLDER
$20.89Holds multi length “D” Cell flashlights. Includes rubber grommet for secure fit. Measurements: 3.5″W x 7″H x 4″D. Weight: 0.4 lbs.
(Wall Mount)
-
TC560 TRAILER-AID® STORAGE POUCH
$28.59Wall Mount bracket safely stores your TRAILER AID ramp device.
-
TC100 TIE DOWN HANGER
$19.79Stores up to 6 ratchet straps or tie-downs securely out of the way. Measurements: 12″W x 3″H x 3″D. Weight: 0.5 lbs. (Wall Mount)
-
PC2015 SHIFNOID STRAIGHT THROUGH VALVE FOR 10 OZ. CO2 BOTTLES
$45.99Replace your heavy V1 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
-
PC2017 SHIFNOID STRAIGHT THROUGH VALVE FOR 2.5 LB. CO2 BOTTLES
$45.99Replace your heavy V4 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
-
PC2000 PERMA-SEAL CO2 OUTLET SEAL
$4.99Perma-Seal provides a permanent seal for the connection between your CO2 regulator and bottle valve . No more leaks. No more plastic washers. Works with CO2 bottle valves that are internally threaded.
(photo is for example only – sold individually) -
PC2001 CO2 REGULATOR SEALS (pack of 5)
$6.99Replace the worn or missing seal between your CO2 bottle and Regulator (pack of 5).
-
PC1800 CO2 BOTTLE BACKUP AIR FILLER
$19.99Empty CO2 bottle? Ever run out of CO2? Fill your CO2 bottle with compressed air directly from your air tank or air compressor. Designed for the high pressures associated with CO2, this part stays permanently on your regulator, ready for immediate use. This unit eliminates the problems of home built units and the dangers of high pressure. Because your regulator prevents free back flow, trying to fill your bottle from the regulated side will not allow your bottle to fill completely. Putting a standard valve in the high pressure side will result in a dangerous, destroyed valve when you use CO2. This new BACK UP AIR FILLER solves all these problems. Uses your regulator to maintain the preset pressures. Use for unexpected emergencies or full time without last minute bottle or regulator modification. PICTURE SHOWN FOR EXAMPLE ONLY. BOTTLE, REGULATOR and GAUGE NOT INCLUDED.
-
PC550 CO2 BOTTLE MOUNT-BOTTLE TO ROLL BAR
$37.99Billet aluminum mount for standard 2″ diameter 10 oz. CO2 bottle. Mounts to roll bar to fit 1 ¼” to 1 ¾” tubing.
-
PC540 CO2 BOTTLE MOUNT – BOTTLE TO FLAT SURFACE
$69.99For 2.5 lb, 4 3/8″ diameter bottle. Polished CO2 Bottle Mount. Mounts to flat surface.
-
PC310 CO2 / AIR SOLENOID (3-WAY)
$79.4912 or 16 volt, Normally open or normally closed operation. Three 1/8″ NPT ports. One IN, one OUT and one EXHAUST. Manual override button. Power and Ground Lead wires. Used on most CO2 / AIR devices. 125 psi maximum.
-
PC410 CO2 / AIR SOLENOID WITH FLOW CONTROLS (4 WAY)
$134.9912 or 16 volt, Normally open or normally closed operation. Four 1/8″ NPT ports. One IN, two OUT and one EXHAUST. Individual flow controls for each OUT port allow you to contol the rate the air flows. Manual override button. Power and Ground Lead wires. Commonly used on Starting line controls and Throttle Stops. 125 psi maximum.
-
PC315 90 DEGREE SWIVEL FITTING
$8.99¼” pipe to ¼” hose quick connect. (actual product may vary slightly from image).
-
PC300 90 DEGREE SWIVEL FITTING
$8.991/8″ pipe to ¼” hose quick connect (actual product may vary slightly from image).
-
PC290 STRAIGHT FITTING
$7.991/8″ pipe to ¼” hose quick connect. (actual product may vary slightly from image)
-
PC295 STRAIGHT FITTING
$7.99¼” pipe to ¼” hose quick connect.(actual product may vary slightly from image)
-
PC275 “T” 1/4″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99Connect to your CO2 regulator to run two devices on the same bottle.
-
PC280 “T” 1/8″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99Connect to your CO2 regulator to run two devices on the same bottle.
-
PC125 CO2 LINE KIT
$24.9910 ft of 1/4″ OD high pressure CO2 line with (1) 1/4″ NPT to 1/4″ quick disconnect & (1) 1/8″ NPT to 1/4″ quick disconnect fitting
-
PC130 CO2 LINE
$26.9920′ of 1/4″ OD high pressure line. Designed for use with “Quick Disconnect” fittings.
-
PC100C PRESSURE RUPTURE DISC, FEMALE FOR CO2 BOTTLE VALVE
$19.99Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 13/16″ wrench flats (CHROME). Acceptable replacement for PC100.
-
PC110 PRESSURE RUPTURE DISC, MALE FOR CO2 BOTTLE VALVE
$12.99Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 5/8″ wrench flats.
-
SW9000 COIL CORD
$25.99Black 18 gauge, 2 wire for use with one switch. Extends to 6 foot. 15 AMP rating.
-
SW8100 POWER DISTIBUTION BLOCK
$42.99Ideal to connect to your main power supply or ground and distribute to eight stainless steel terminals. 3/8″ post. Rated at 48 volts DC. Base is glass filled nylon. Mounting is 2.5″ center to center.
-
SW7300 LARGE BUTTON TRANSBRAKE SWITCH WITH .03 ADJUSTMENT
$76.99This large button, easy-to-feel switch has an adjustable delay to meet your needs, and it is ideal for classes of racing that prohibit a delay box. Switch allows for up to .03 second delay. A 7/16” hole size is required for mounting.
** OUT OF STOCK ** -
SW7200 TRANSBRAKE SWITCH .03 DELAY ADJUSTABLE
$73.99Transbrake switch with extra long adjustable travel. This switch is infinitely adjustable and can delay reaction up to .03. Useful in classes that do not allow delay boxes.
** OUT OF STOCK ** -
SN5275 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (BLACK POWDER COATED SOLENOID)
$169.99This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED) -
SN5250 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (YELLOW ZINC, GOLD COLORED SOLENOID W/BLACK DECAL)
$159.99This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED) -
SN5200 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
$149.99Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED) -
SN7000 ALL ELECTRIC 2-SPEED SHIFT KIT, HEAVY DUTY (SOLENOID)
$179.99This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift. This specialty unit can replace the SN5000FC and SN5000RC if necessary for your application. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables and Hurst Quarter Stick II with Rear Exit Cable. Aluminum shifter cover will not work with this model. On Hurst Quarter Stick II, neutral safety switch has to be trimmed.
-
SN7600 OVERSIZED HEAVEY-DUTY SOLENOID
$169.99This oversized solenoid produces the extra force necessary for heavy-duty applications and hard-to-shift shifters and transmissions. Ideal for shifters with extra-long cables that make them hard to shift. This specialty unit can be a substitute for the SN5000FC and SN7000. The aluminum shifter cover will work with this model. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables.
-
SN6000 2-SPEED SPRING SHIFT KIT FOR MOST 2-SPEED SHIFTERS
$149.99Solenoid / Spring shifter activator. Electric activated shifters give you consistent, hands fee shifting. Low amperage draw, spring activated shift kit for 2 speed transmissions. Mounted to your shifter, the bracket works with B&M ProStick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cable, and Hurst Quarter Stick II with Rear Exit Cable. Connect to your RPM Activated Switch or Timer for reliable shifting.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN5070 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
$319.99Convert your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. New and improved for 2018, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets. (SHIFTER NOT INCLUDED)
ATTENTION: Not recommended for Ford C4 and C6 transmissions with full manual valve body with the line pressure set above 200 P.S.I.. These transmissions at high pressure create a load greater than these electric solenoids can handle. The best choice for these heavy-duty loads is the SN5072 Heavy-Duty electric kit or the SA4070 CO2/Air Kit.
-
SN5072 HEAVY DUTY 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
$359.99This Heavy Duty version of the original SN5070 is designed for hard shifting shifters. It also features a redesigned bracket for easier installation.
Converts your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes Heavy Duty solenoid, safety switch, relays, handle attachment and brackets.
(SHIFTER NOT INCLUDED) -
SN5055 ALL ELECTRIC 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$299.99Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to your shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay.
(SHIFTER NOT INCLUDED) -
SN5057 ALL ELECTRIC 3-SPEED SHIFT KIT, FORWARD SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$299.99Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to B&M Pro Stick or Hurst quarter Stick shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay.
(SHIFTER NOT INCLUDED) -
SN4200 ALL ELECTRIC 2 SPEED STANDARD PATTERN SHIFT KIT FOR TURBO ACTION CHEETAH SCS SHIFTER
$179.99Hands-free automated shifting for accurate and consistent shift points. NO CO2 Bottle and Regulator needed. Wire into any RPM Switch, Push Button or Timer. Kit includes HEAVY DUTY solenoid for extra hard hitting, Stainless Steel Bracket and Heavy Duty relay. Easy Installation. Made in the U.S.A. (SHIFTER NOT INCLUDED)
-
SA4000 CO2 2-SPEED SHIFT KIT FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$129.99Hands free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 shift. Includes cylinder, solenoid, bracket, airline and fittings. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
-
SA5400 CO2 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
$149.99Hands- free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 shift. Includes cylinder, solenoid, airline and fittings. A CO2 bottle and regulator is a required option.
(SHIFTER NOT INCLUDED) -
SA4055 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$359.99Hands-free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 and 2-3 shift. Simple conversion to Shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, CO2 cylinder, handle attachments and adapters and bracket. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
-
SA4070 CO2 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$359.99NEW AND IMPROVED FOR 2020. Laser-cut Stainless Steel bracket that makes this kit stronger and easier to install than the previous model. Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
-
SA4075 CO2 2, 3, OR 4-SPEED SHIFT KIT, STANDARD FORWARD OR REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$559.99Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. The cylinder-operated shifter makes your 1-2 shift for a 2-speed and your 2-3, and 3-4 shift for your 3 or 4 speed transmission without inhibiting your ability to shift manually. Included “Elite RPM Switch” prevents accidental activation from high gear into neutral, even if engine returns to shift RPM. Safety Switch prevents inadvertent activation from park or neutral into gear. Includes Digital Delay #1067 RPM Switch, cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. Can be converted to a reverse shift pattern if your transmission changes. A CO2 bottle and regulator is a required option.
OPTIONS AND THINGS TO CONSIDER:
- Any forward pattern transmission using this kit MUST be controlled by a smart RPM switch, which is included in the SA4075 kit.
- If you have a reverse pattern transmission, order the SA4070 which can be controlled by any RPM activated switch.
- If you already own a smart RPM switch, that can be programmed to limit the number of shifts, you can buy this kit without the RPM switch by ordering a SA4070, and moving one airline, which converts it to a forward pattern. (SHIFTER NOT INCLUDED)
-
SA4080 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN, FOR TURBO ACTION CHEETAH SCS SHIFTER
$219.99Convert your Turbo Action Cheetah SCS Shifter to a hands free automated shifter for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift. Includes cylinder, solenoid, airline, fittings and brackets. A CO2 bottle and ADJUSTABLE regulator is a required option.
(SHIFTER NOT INCLUDED)- SA4080 Shift Kit – Fits Turbo Action Cheetah SCS Shifter Ford and Chevy Reverse pattern 3 speed only.
- SA4080M Shift Kit – Fits Turbo Action Cheetah SCS Shifter Mopar Reverse Pattern 3 speed only.
-
SN8800 THROTTLE STOP / STARTING LINE CONTROLLER, DUAL DIRECTION, ADJUSTABLE
$219.99A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. Air driven both directions, with a unique flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram. Solenoid is remote mounted for lighter weight on your linkage. Air line and fittings included. 2″ stroke length.
-
SN8000 THROTTLE STOP / STARTING LINE CONTROLLER
$157.49The release of a button controls your throttle from a designated pre-set launch RPM to full throttle, all while the gas pedal is on the floor. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. 2″ stroke length.
-
SN3875 30/40 AMP RELAY 12 VOLT
$11.49High current relay actuates accessories that draw high current. 12 volt DC single pole / single throw.
-
SN3885 60/80 AMP RELAY 12 VOLT
$12.99High current relay actuates accessories that draw high current. 12 volt DC single pole / single throw.
-
SN3850 20/30 AMP RELAY 12 VOLT
$11.49High current relay actuates accessories that draw high current. 12 volt DC single pole / single throw.
-
SN3750 REPLACEMENT SOLENOID FOR SN5200 2-SPEED B&M PRO BANDIT
$99.99SN3750 replaces solenoid on a SN5200 electric 2-speed shift kit for B&M Pro Bandit. This replacement solenoid requires components from the original SN5200 shift kit. This is NOT a stand-alone unit.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3410 REPLACEMENT SOLENOID FOR SN5000RC HURST QUARTER STICK II WITH REAR EXIT CABLE
$99.99Replaces solenoid on a SN5000RC for Hurst Quarter Stick II with Rear Exit Cable.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3400 REPLACEMENT SOLENOID FOR SN5000FC 2-SPEED
$99.99Replaces solenoid on a SN5000FC shift kit for 2-speed forward pattern.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3050 REPLACEMENT SOLENOID FOR SN5055 REVERSE PATTERN 3-SPEED
$103.99Replacement Solenoid for SN5055.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3000 REPLACEMENT SOLENOID FOR CMW 2-SPEED SHIFTER
$93.99Replaces solenoid on a SN5100 (electric 2 speed shifter).
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
NCRPM4000 ADJ-A-CHIP
$27.99Adjustable RPM Chip. Plug in RPM module works with most ignition controls including MSD and Shifnoid, and is adjustable from 1,000 to 11,000 RPM with the turn of a screw.
-
NC5300 UlTRA SHIFTER CONTROLLER
$149.99When used with 2 RPM switches, it will allow you to shift at 2 different RPM settings. Solves the problem of a RPM level that does not drop off between shifts, preventing your RPM switch from shutting off and resetting itself for the next shift. This is a common problem if you shift before your converter is locked or your tires are spinning, such as mud racing. These situations allow the RPM level to continue to climb instead of dropping off after the shift. Built into the controller is a RF Filter and Voltage Regulator to increase the reliability and accuracy of the RPM switches and a lock out switch to prevent the unnecessary reactivation of your shifter, once the transmission is in high gear. The controller can be wired for 1 or 2 shifts when used with 1 or 2 RPM switches.
** OUT OF STOCK ** -
SN3600 REPLACEMENT SOLENOID FOR SN5070 B&M PRO RATCHET REVERSE PATTERN 3-SPEED
$99.99Replacement Solenoid for SN5070 for B&M Pro Ratchet Reverse pattern 3 speed.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **