Engine & Racing Accessories

Showing all 6 results

  • NC6200-300x300s

    NC6200 Bump Box

    $199.99

    The addition of an Outlaw Bump Box allows for a smooth transition during the drag-strip staging process. Critical to cars that need to rev up before final staging such as turbo cars but also used by many non-turbo bracket racers. Being able to slide through the pre-stage beams and into the staged beams with precise tuning, cuts down on rocking, bumping and red-light starts. This box is easy to use. Simple adjustments can be made to accommodate different tracks, power levels, and rpms. This one-touch operation results in better focus, consistent launching, and better reaction times.

    With the included relay the box will interrupt either the positive or negative wire on the Trans-Brake solenoid. When the Bump button is released ( not included ), it starts the timer, opens the relay, then closes the relay when the timer times out. The amount of time determines the “bump” distance.


  • Tool tray

    TC585 TOOL TRAY w/ DOMINATOR CARB RING

    $99.99

    Engine top tool tray with carburetor ring for Dominator ( 4500 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc. Carb ring comes separate and can be left off for shop use or non carburetor engines.


  • Tool tray

    TC580 TOOL TRAY w/ STANDARD CARB RING

    $99.99

    Engine top tool tray with carburetor ring for standard ( 4150 ) carburetor. Covers your carb to keep out debris and loose parts. Gives you a handy place for spark plugs, screwdrivers, allen wrenches, valve adjusting tools, etc.. Carb ring comes separate and can be left off for shop use or non carburetor engines.


  • pc3000-300x300

    PC3000 ENGINE LEAN OUT KIT

    $79.99

    Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10′ X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.


  • pc3100-300x300f

    PC3100 ENGINE LEAN OUT KIT w / BRACKET

    $94.99

    This model includes a heavy duty aluminum bracket.
    Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10′ X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.


  • pc4000-300x300b

    PC4000 – AIR COMPRESSOR , 12 Volt

    $379.99

    ELIMINATE YOUR CO2 BOTTLE AND REGULATOR

    Mounted in your vehicle, it replaces your CO2 Bottle and regulator. No more filling and maintaining your bottle. Run your Air shifter, Starting Line Controller, Throttle stop and other CO2 / Air devices that operate in the range of 90-120 PSI. This includes most all devices currently used in racing and off road applications.

    Includes a “No Kink” Polyurethane coiled hose and tire chuck to maintain your tire pressure, eliminating the need to haul your portable air tank.

    Unlike many 12 volt compressors on the market, our customized unit has a 1/4 gallon recovery tank to supply that volume needed to activate many Air devices used in racing.

    Compact size, approximately 10″ x 7″ x 4″ and net weight of only 10 lbs.